Jump to content
SAU Community

Recommended Posts

So today i had a dyno run and my $22 boost controller was well, crap, so i need a new one. There are so many out there on the market, so can somone help me pick one. I have no idea what is best bang for your buck. I realy like the functions that the APEXI AVC-R has, but it's a bit much. I have also hear good things about GIZZMO IBC ect. What about turbosmart ect. There are just sooo many and not sure what to get.

I have alos heard good things about the JAYCAR units, but by the time you get everything and wire it up, cost are about $200 or so.

Can people help me pick one and tell me what to go for and what to stay away from. PLEASE.

Thanks

BTW, here is my dyno run, as you can see the boost is all over the place, spiking ect.

post-27760-1159876803.jpg

Link to comment
https://www.sau.com.au/forums/topic/137190-need-a-new-boost-controller/
Share on other sites

dam it, my car ran like crap this morning. Dam overboost, i think the car is also hitting R&R, so it makes it worse. LOL.

What do you think of the power curve, preat crap, or allringht, the car just doesn't feel right, it seams wrong.

Pulls hard then flatterns out, then pulls dam hard again.

BUGGA

I have friends with the gizzmo IBC its not a bad unit but pretty hard to use.

I have the HKS EVC 5 thats one damn wicked boost controller but it also cost me $950 so not a cheap option at all.

The apexi AVC-R would be a very good option but still pricy.

but a cheaper option is the turbosmart duel stage manual boost controller are ment to be very good.

Also the go fast bits boost tap is also ment to be a good manual controller for under $100

What do you guys think of the dyno curve, it sux a bit cos once it gets to 6250rpm she platoes out.

Yeah i would love a teh APEXI AVC-R but dam pricy, tooo pricy.

if i have the TURBOSMART singlr boost, i can just run that without the hi low mode then can't i. I have ripped out the stock selenoid so not sure if i have all the bits to connect it back up.

yehh it was a fair bit

look around champ

check out

http://www.greenline.jp/

read up on a few and see the functions they have....

once i give the gal a beatin after the avcr is installed i shall let you know

then next week ill have some dyno printouts aswell :):kiss:

Im running the hybrid boost controller, but honestly if i had the extra money id go for something like the Greddy or other name brands for reliability and better tuning capabilities in my opinion

Edited by Devils_Advocate21

Well I'm an absolute noob when it comes to car mods, and I've never used any other boost controller before, but I purchased and built the Jaycar hand controller, boost controller and digital fuel adjuster for under $200 total. I'm incapable of installing it myself, so I found a friend willing to help me and ended up paying him $150 to install it and a couple of other things over a couple of days. I'd imagine anyone who's familiar with hooking wires into the ECU and capable of following instructions (to build the kits) could do it all themselves.

Although I'm sure my ECU is going into R&R (running 12.5 psi - too much I think), the boost is dead flat all the way to 7000 rpm. I had an aftermarket boost gauge installed to check this BTW. I'm hoping the DFA will help get rid of the R&R (not sure if it will help at all though) and hopefully make a bit more power whilst improving fuel economy.

I had absolutely no experience in building electronic kits prior to these. If you buy the performance electronics for cars mag from Jaycar you shouldn't have any trouble at all.

So overall, I'm very happy with the Jaycar kit. Sure, it takes a while to build and install, but from what I understand, any EBC is gonna take a while to install anyway, it's just that you don't have to build it. But you're gonna be up for a lot of $$$ as a tradeoff. I'd say timewise you'd be looking at 12-15 hrs to build the kits (if you're an absolute beginner) and about 5 hrs to install the two kits, allowing for the inevitable problem(s) :laugh: Sounds like it's worth it to me!

I have built plenty of kits before, all small scale, and all worked ok. I already have an SAFC II, just need to controll the boost better.

Is it hard to tune the controller on the road, do you start by getting 100% open and then work down or the other way arround.

I have a friend who is an wiss at electronics, he would build it for me.

Greddy Profec E-01 is your answer :happy:

Upgraded to this from the Hybrid EBC and the car is "totally different"... best of all there's a screen to monitor every aspect of boost so there's no more guessing at whether or not your boost is holding/dropping.

Expensive piece of gear; I've seen these floating around for almost $1k

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...