Jump to content
SAU Community

Recommended Posts

java script:emoticon(':(', 'smid_2')

:(For Sale or Wrecking!!java script:emoticon(':)', 'smid_2')

:O

1988 Nissan Cefiro

RB20DET Manual (converted but with int. trim)

Viscous LSD (4.3:1 ratio)

Car was in drivers side accident

img00013df5.jpg

I am sick of trying to get another good car imported.

Time for it all to go.

Car was 97% before acident so most parts will be spot on.

Honestly it'd be easier for you to ask for what you want and price than it would be for me to put them up.

You can have the whole thing for around $$4500 ono.

A few extras:

High flowed turbo .

5 puck Daikin clutch.

R33 series2 front seats.

RSR Rear springs.

Many parts for 5 stud conversion (front and rear)(entire rear setup times 2).

I'll add more as i think of em.

I would prefer to sell the motor box ecu loom as one $$2500 ono 114000k's with 4.3:1 diff for who knows how long so theres less than this. Never driven with turbo but minimal shaft play, all it needs is union adapters.

Please ask me if your after anythin and if you want pics then yeah same deal...

Thanks,

Aaron

Link to comment
https://www.sau.com.au/forums/topic/137481-1988-cef-for-the-wreckin/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Hey guys,

Sorry about how long i've taken to reply.

The parts are located in windsor, NSW.

The entire motor and driveline have been spoken for.

The RH front guard is gone.

The rear suspension is gone ( except the springs and 5 stud bits).

Passenger side Air vent $40

Passenger seat rail $70

Drivers side air vent $40

Front 5 stud hubs (hub only) $100

Rear 5 stud hubs (brake shoes an all no discs) $150

Rear windscreen $150

Front bar (cut out for FMIC) $70

Rear Bar $100

Bootlid (no spoiler or holes, 100%) $150

Manual centre console $100

Window regulators $30

Front left castor rod mounts $??? offer

Any other enquiries can be made to 0401165572 between the hours of 7 and 10pm weekdays (phone will not be answered to numbers i dont know outside these hours) weekends and tuesdays between 9am and 10pm.

Thanks,

Aaron

I say we just all go to nissan and do a massive group buy on vents.

Anyway, do you have the air vent servo thing. Its the motor and arm, when you hit the button on the climate control its the thing that moves the flaps to re-direct the air around. Do you have that and does it work. If so how much. (its down near where the drivers left foot is, directly upwards)

Yeah i assume that i do and The air directs around fine so yeah make me an offer.

The air vent is actually not taht good, sorry i just checked then, It's not that bad, its got a small crack and the surround is broken away from the main part. still may be better than what you got as it would be an easy fix.

Edited by dontbescared

DUDE!!! Do you have the sun visors still?

I need the drivers side clip. As in the one that you unclip when you want it on the drivers side window side. I really need it hey, my sunvisor keeps hitting me in the head. I dont like it.

$5 for the clip (if you have it), $25 for the a/c flap thing. And I dunno $20 for postage should easy cover it?

Ok I'm takin offers on everythin as long as there not rediculous...

Post up your offers and i'll PM you to let you know.

Oh and Daveo you can ahve em for that money. so i'll send em COD for 50$$. PM me your details.

Edited by dontbescared

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...