Jump to content
SAU Community

Recommended Posts

they only run partially at idle to stop flowing at the full rate when its not needed.

how did it go fitting in the 33gts-t?

does the whole assembly slide in or did u just have the pump and fit it onto the gts-t standard bracket?

I just had the pump, i didnt install it. From what i gather the mechanic that installed it just used the standard bracket.

If you dont like loud pumps i reccomend giving a 34 gtr pump a miss, i may replace it with something else in the near future!

I just had the pump, i didnt install it. From what i gather the mechanic that installed it just used the standard bracket.

If you dont like loud pumps i reccomend giving a 34 gtr pump a miss, i may replace it with something else in the near future!

thanks for that.

i have the whole r34 gtr assembly, the pump comes with a thick rubber surround, im pretty sure that would keep it quiet. if he fitted it to the stock bracket chances are its metal on metal to make it fit in a near standard position.

i have a bosch pump which is touching the bottom of the tank, but i installed it with rubber everywhere ie no metal on metal, and its only just louder than stock, not noticeable unless u are really listening to it.

post-2685-1161620793.jpg

  • 6 months later...

Ive just installed a GTR pump. Quite noisy but then again I only have about 10L of fuel in the tank. Can hear it wirring away. Might take it out one day and put some rubber around the pump in between the hose clamp.

I was worried the pump might be on the way out but it seems that a few people seem to find them noisy.

I tried to keep it from resting on the tank but it was pretty tight in the R33gtst. Its a sedan so I'm not sure if the tank is a different shape.

Anybody pulled them out to put rubber in there and found it reduces the noise?

Thanks

Buzzing - depending on how loud it is - 1 person's loud is another person's quite.

Either nitrile rubber or EFI hose.

You can buy big EFI hose and slit it. Cheapest nitrile rubber (never had a problem with it decomposing) is buying a pair of nitrile rubber gloves from supercheap auto. About $10. I just cut them up and use that.

I still say no rubber is required. I dont' have rubber, my pump sounds the same as any gtr pump in a gtr.

The only time i've ever used rubber is when i was doing something special. not just a normal hose clamped pump install.

Nah, I'm pretty sure the rubber is different. Radiator hose is water only.

Cheapest option (won't cost ya anything) is to grab some of that hose that came iwth the cradle, slit that, and put it in.

Have you put that extra clamp in yet?

Have you put in a new tank seal yet?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...