Jump to content
SAU Community

Recommended Posts

Hey guys i was wondering if someone could give me a brief yet descriptive explanation for boost cut.. My mates skyline gets it and he wants to know how to go about getting rid of it... Just want to know what exactly causes it, What it does and how it can be fixed.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/
Share on other sites

Boost cut...

Caused when the turbo supplies too much boost for the stock ECU to handle.

Well, not so much handle, but for the ECU to scream "I WON'T LET YOU HURT THE MOTOR!"

Basically, to avoid it, turn the boost down a touch.

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/#findComment-2581669
Share on other sites

Boost cut...

Caused when the turbo supplies too much boost for the stock ECU to handle.

Well, not so much handle, but for the ECU to scream "I WON'T LET YOU HURT THE MOTOR!"

Basically, to avoid it, turn the boost down a touch.

Oh ok thanks for that... As soon as he buys a new boost controller ill do that.. (screen broken)

Bloody boy racers :)

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/#findComment-2581677
Share on other sites

Hey guys i was wondering if someone could give me a brief yet descriptive explanation for boost cut.. My mates skyline gets it and he wants to know how to go about getting rid of it... Just want to know what exactly causes it, What it does and how it can be fixed.

Thanks

R33 RB25DET boost cut is around 12psi, R32 RB20DET boost cut is about 21psi.

Are you sure it is boost cut?

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/#findComment-2581679
Share on other sites

R33 RB25DET boost cut is around 12psi, R32 RB20DET boost cut is about 21psi.

Are you sure it is boost cut?

21 psi on a stock ceramic turbo and stock ecu?

wtfark.

I think it is?

When he gets up it a bit the BOV goes off like a slart and and the car jerks and shudders and it feels like the turbo actually is cutting in and out.. he is running around 14 psi. All he has is pod filter, FMIC, Exhaust system and a bov. not sure of the brands.

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/#findComment-2581690
Share on other sites

R33 RB25DET boost cut is around 12psi, R32 RB20DET boost cut is about 21psi.

Are you sure it is boost cut?

There is no such thing as boost cut

The ECU goes into Rich & Retard mapping, it has to do with airflow, not a specific level of boost as such.

OBNXSH - what you are describing sounds to me like its due to the BOV, its ATMO venting correct?

If your mate puts the stock BOV back on there, that will fix the problem for free.

Oh, and 14 isnt safe... the turbo might live, it might not

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/#findComment-2581701
Share on other sites

There is no such thing as boost cut

The ECU goes into Rich & Retard mapping, it has to do with airflow, not a specific level of boost as such.

OBNXSH - what you are describing sounds to me like its due to the BOV, its ATMO venting correct?

If your mate puts the stock BOV back on there, that will fix the problem for free.

Oh, and 14 isnt safe... the turbo might live, it might not

I see.. Alright ill see how that goes.. Its just weird because my parents used to own a 33 gtst on 14 pounds on the stock turbo, stock ECU with a 60- 40% plumb back BOV the GFB hybrid one, And the same thing happened with that... The mechanic which worked on it (owners of the old hardcore racing in brisbane) said that it was boost cut :S

Weird. maybe its just a nickname or something.

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/#findComment-2581715
Share on other sites

Well if its doing it under load, then its Rich 7 Retard

If its playing up when he backs off? Ie, the BOV going off, is he backing off, or is that under full load?

If its under load, then thats Rich & Retard. Backing off the boost will reduce the airflow and make the ECU happy.

A PowerFC or any other ECU will stop that from happening if you wanted to get rid of the problem altogether

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/#findComment-2581718
Share on other sites

It happens around 4 1/2 - 5k revs, it stops when you back off. it just jerks the car around, its like it cuts out and the car jerks forward then it kicks back in and take off and then stops again and jerks the whole car forward and the only way is to back off the accel all together... its pretty scary when it happens when you dont expect it.. on the odd occasion it happened when the turbo was just spooling (in my parents 33)

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/#findComment-2581721
Share on other sites

Just drop the boost till it stops, could be 12psi, could be 10psi.

Only way to know is to knock it down bit by bit.

But it will fix it.

If it doesnt, could well be a coil pack/ignition issue then.

But back the boost off first

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/#findComment-2581724
Share on other sites

There is no such thing as boost cut

The ECU goes into Rich & Retard mapping, it has to do with airflow, not a specific level of boost as such.

OBNXSH - what you are describing sounds to me like its due to the BOV, its ATMO venting correct?

If your mate puts the stock BOV back on there, that will fix the problem for free.

Oh, and 14 isnt safe... the turbo might live, it might not

In two of the stock ECU 32's I did it on, it actually cut ignition at 21psi boost.

The 33's I meant boost limit. (Via solenoid)

Link to comment
https://www.sau.com.au/forums/topic/138607-boost-cut/#findComment-2581729
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...