Jump to content
SAU Community

Recommended Posts

I believe there were some they didn't come with hicas as there is a powersteer pump available without hicas.

Most likely the n/a base model.

I'm probably wrong though as I don't know for sure.. Just something I vaguely remember.

I found heaps of R33's that didn't have HICAS, & they were factory original.

When I bought mine it was the only one I'd found with the system on it & these were only just complied cars we're talking about here too. The setup is actually a bit different & lacks the adjustments for toe that the HICAS type rear end has.

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2707798
Share on other sites

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

- re-instate abs control function. (doesent have abs.. IDIOT) supply report stating operation ok

Hmm, I thought this one interesting, but I suppose it part and parcel with inspector inconsistencies.

When my car went through, I had the ABS fault light ON (I've turned it off due to common problems with it) in orange on the dash and no comment was made about it. ABS shouldn't matter if you can pass the breaking test.

Best of luck

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2708498
Share on other sites

Hmm, I thought this one interesting, but I suppose it part and parcel with inspector inconsistencies.

When my car went through, I had the ABS fault light ON (I've turned it off due to common problems with it) in orange on the dash and no comment was made about it. ABS shouldn't matter if you can pass the breaking test.

Best of luck

i have passed the breaking test.

thanks helso for the offer, when i can find the hicas i may take you up on that. :D

dam, they system is setup to focus more on the technicality than the practicality!

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2709391
Share on other sites

Yeah bud, if there's a lock bar in place, we could do a swap. The only problem I forsee is that it requires a wheel alignment to be done after the swap, so if you wanted the bar back, you'd have to get two alignments done. For a time frame, I'd go with Nozila's estimate, but, now that I've done one, I think I could shave a half an hour to an hour off of it

Edited by heslo
Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2710729
Share on other sites

thats true, once you 'crack' the bolts so to speak, its alot easier to unbolt and re-bolt. i didnt have that luxury as i stated, i was first time the bolts were unbolted. but since you have (i presume) a lock bar then your bolts would be easy as to undo. pain in the back side none the less. wheel alignment is highly advised.

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2710855
Share on other sites

maybe it would be easier to just borrow one thats already off, wanna lend me yours nozila?

i have to replace my battery in my boot with a dry cell batters i have been quoted $480 for one.

wat the hell this is bullshit, F@#K this government. seriously!

Edited by DriftR_33
Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2711010
Share on other sites

Yeah, it's screwed up but what can we do? If you don't want to swap with mine and get a replacement that you can use, I'm still more than willing to lend a hand.

thanks mate for willing to help me... :)

my mate found me a r33 hicas today and have installed it. cost me nothing HAHA :D:)

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2722137
Share on other sites

. We need cops that stop crime instead of discriminantely fleecing certain members of the public & making them out to be the crims instead.

true ^^

1 of the reasons why i sold my old 33gtr years ago...they pulled me over and gave me a fine for changing lane @ a roundabout (glenelg) near the revolving restaurant. Another time they pulled me over to search for my 2 bov, but being stupid noobs, they couldnt find them, bov are under the engine bay in GTRs.

just anything they could find, they'll make that extra effort to fine/defect u

while the real bad guys are still out there doing the real damage

so bl jase, just a bad day out @ kfc :D

Edited by andz69
Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2722158
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • *that* is a question for chatgpt (or someone that understands maths....but I'd try chatty). Drop them the table and ask for the formula
    • Alright. Exhaust has been looked at, and booked in 'soon'. I'm not 100% convinced it's going to be as good as possible but I'm going to go with it anyway. If I get a reasonable thing that works for 10 years I mean that's twice as long as I've lived with the current one. I have a more pressing issue. I have fixed my MPVI3 (by buying a new one). Excellently, one can wire in analog 0-5v inputs to the ECU itself. I had wideband already via Serial so I also wired it in via the direct input. The idea being I can use the standalone logging without a laptop and have Wideband data in it. The other wire I thought I'd use oil temp. This is where I've gone crazy. HPTuners requires you to implement a formula so you know how much volts = how much temp. This seems relatively simple to me. However I cannot find the scale for this anywhere on the internet, nor decipher how to figure it out without removing the sensor from the car. All I know is that voltage actually goes up as temperature goes down. I am using the actual gauge, so I can see what the temp is. The signal wire has been branched off into the MPVI3. EXAMPLE: 2.68v = 58C 2.7 = 57C 2.74v = 56C 2.8V = 54C 3.06V = 49C 3.18V = 47C 3.37V = 43C I think the gauge is 50-150C. It may be more. It may be less, because I can't find it for the love of f**k. It appears all the information about the gauges I have has been scoured from the internet, but the sender is VDO 320.021 I believe the resistance chart is this How the f**k do I convert this to a voltage? Once I have a voltage... I then have to perform this transform of said voltage to show it in the scanner: https://www.hptuners.com/help/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm @GTSBoy you're probably my only hope here TEST YOUR MIGHT
    • Here’s the updated and installed muse replica nismo ones … very happy with the outcome. Eventhough I painted my whole rear end due to my rich idle lol. 
    • Hmm. I had a good look (w/o searching, because I'm not logging in) and couldn't see it either. I distinctly recall the thread, not many weeks ago. It must have been removed or perhaps put into the back section. If it was in Off Topic you should at least have been able to search it up. So if I'm not hallucinating, it is fairly decently removed.
×
×
  • Create New...