Jump to content
SAU Community

Recommended Posts

On a twin 2 inch system

R = 1 inch X pi (3.14) then square it = 9.88 cubic inches

times 2 pipes = 19.77 cubic inches

On a single 3 inch

R = 1.5 inches X pi = 4.7 squared = 22.22 cubic inches

So a single 3 inch pipe has more volumn then a twin 2 inch.

I rest my case...

Why are you talking about cubic inches?

Cubic = Volume

Volume is dependent on length, as V = Surface area x Length. So, if my 10 inch exhaust is 1 inch long, does that mean that my 1 inch exhaust that is 10 inches long has the same flow rate? No, because flow is more highly based on surface area rather than length (Unless you really want to get technical with gas velocity etc)

Hence, my use of surface area of a circle (exhaust size) as a comparo.

Also, fcruz3r, you will be more than happy with the Apexi muffler, STAGEN has one on his car.....AND I WANNA STEAL IT! :laugh:

Why are you talking about cubic inches?

Cubic = Volume

Volume is dependent on length, as V = Surface area x Length. So, if my 10 inch exhaust is 1 inch long, does that mean that my 1 inch exhaust that is 10 inches long has the same flow rate? No, because flow is more highly based on surface area rather than length (Unless you really want to get technical with gas velocity etc)

You could choose between 1x4" pipe or 16x1" pipes out the back as flow is inversly proportional. But this doesn't take into account the boundry layer separation that would create drag at the surface of each pipe which means the surface area has to be minimised. This means the 4" would outflow the 16x1". But just imagine the chicks you'd pull with 16x1" pipes. It'd be fully sick mate..

I don't think mr plod would be worried about that when he see's the pimpmobile, He'd be worried about db and clearance. Then again if he sees a 4" pipe out the back of a stocker, and a discreet pair of 2" out the back of a 600kW firebreather he's probably gonna pick on the 4" because he looks like jailbait.

One day I'll figure out how to separate the quote from the text. but today is not that day.

Why are you talking about cubic inches?

Cubic = Volume

Volume is dependent on length, as V = Surface area x Length. So, if my 10 inch exhaust is 1 inch long, does that mean that my 1 inch exhaust that is 10 inches long has the same flow rate? No, because flow is more highly based on surface area rather than length (Unless you really want to get technical with gas velocity etc)

Hence, my use of surface area of a circle (exhaust size) as a comparo.

Also, fcruz3r, you will be more than happy with the Apexi muffler, STAGEN has one on his car.....AND I WANNA STEAL IT! :whistling:

Thanks alexcim ...the apexi unit comes with a 4 inch inlet so I'd have to step up the current piping ...although there is a hks super dragger unit on ebay which looks oh so tempting :devil:

http://cgi.ebay.com.au/HKS-SuperDrager-Sta...1QQcmdZViewItem

too bad shipping will cost too much :woot:

You dont want a super dragger eh, went cruising with a mate in his old r33 with one and after 30mins I had to stop and get out, the drone was giving me a headache!

Got the whole end section replaced on saturday...must say that the guy at ian diffens osborne park did a fantastic job ...used 2 mandrel bends, a flange plate and a section of pipe...very pleased indeed.

the muffler does drone quite a fair bit at lower rpms (1.5-2k) but the beauty is at high revs...especially when it pulls past 3k rpm ...the exhaust sound almost completly fades away and all u can hear is the turbo chirping ...and got it mounted high so the body of the muffler is tucked away...very stealthy.

will be looking at a split dump..or a screamer for the next part of my project.

Don't even talk to me bout exhausts I got defected for mine the other week.

While yes I will agree it was loud (altough my kids never complain) the police officer was a dick!!

My exhaust is 3" from the cat bak with a cannon.

Won't even bother to quote the db reading before I got it fixed but it was loud..

Afterwards with the silencer in place and a shit load of steel wool in the guts it still only just passed. (and by saying this the guy felt sorry for and just let it pass)

But now I have the car engineered the Police cannot pick on me anymore.

Now I wish I had just left the car standard would have saved a shit load of money and all the hassles..

Edited by Mum's Taxi

huh?

area or a circle is pie x radius squared

radius of a 2 inch pipe is 1 inch

1x1x3.14= 3.14sq inces x2 pipes is 6.28 sqinchs

radius of 3"=1.5

1.5x1.5x3.14= 7.065 sqinches.

2 2"inches has more cross-sectional area than 1 3" pipe...

you all should go back to school... :thumbsup::)

or am I missing the point....

EDIT - looks like I can't add up either. Changed to correct value...

Edited by chrissso
Don't even talk to me bout exhausts I got defected for mine the other week.

While yes I will agree it was loud (altough my kids never complain) the police officer was a dick!!

My exhaust is 3" from the cat bak with a cannon.

Won't even bother to quote the db reading before I got it fixed but it was loud..

Afterwards with the silencer in place and a shit load of steel wool in the guts it still only just passed. (and by saying this the guy felt sorry for and just let it pass)

But now I have the car engineered the Police cannot pick on me anymore.

Now I wish I had just left the car standard would have saved a shit load of money and all the hassles..

oh sheet...i just got a speed ticket today + 1 demerit....last thing i want is to get my car defected :sleep:

might have my speedo checked....i swear i was doing 70...was picked up doin 78

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...