Jump to content
SAU Community

Recommended Posts

Hmmm.... We don't take kindly to your type around here, Bogan. :O

My type? Around here? LOL who do you think you are? ive been here alot longer than you kid so take your auto home...

My type? Around here? LOL who do you think you are? ive been here alot longer than you kid so take your auto home...

:O.

We deserve some respect dont we brad.

Now when you ladies have put the nails away we can get on with the job.Im keen to see some decent hp cars for a change.

Sorry i didnt mean to offend you or your boyfriend, drive safe and have fun putting your clutchless manual in Drive :laughing-smiley-014:

This forum isnt supposed to be for fighting and i don't intend to play along any further. It may only be auto, but I couldnt afford the manual version which costs another $5-7k....i'm sorry that i am just not a wealthy as you.

Maybe i'll see you out somtime??? give me yell if your heading out and maybe you might appreciate the cars looks and just not judge it on the basis of it being auto.

Geez.... :)

i for one know how neat and clean sunnycoast's ride is. absoloute mint! very nice GT-T, and the fact that its tiptronic doesnt make any difference. lets keep this forum to car talk and not puttin others down. if ur gonna say anything make it something useful!

Edited by Darkness_Ryda1
This forum isnt supposed to be for fighting and i don't intend to play along any further. It may only be auto, but I couldnt afford the manual version which costs another $5-7k....i'm sorry that i am just not a wealthy as you.

Maybe i'll see you out somtime??? give me yell if your heading out and maybe you might appreciate the cars looks and just not judge it on the basis of it being auto.

Geez.... :)

lol we had an auto R34 GTT.. good to drive.. dnt mock em.. they are a good equivalent to the Manual the tip box is good..

i just got an r34 gtt in triptronic and its fun to drive, i would rather an auto to a manual.just because u drive a manual dont make u more of a man then anyone else, its the way u drive it that counts not on the transmission. plus im an lazy lol :)

I saw some dude with a lexus on 20's wearing a shirt like that once, he looked kinda emo..

Yeh I know that guy, drive's his dad's Porsche around thinking his king shit, think his name is Nismo_Boy on the forums, NFI idea why he used to own a Lexus on 20's though. Lost the plot haha :spank:

Whats been doing buddy? Haven't heard from ya in a while, still got teh GTR?

rofl i remembered this ad, and though it would be perfect for this debate rofl hilarious:

anyone seen the solo add, with the guy going for a test drive then he;s like: oh shit, its a manual?!?!

http://mancans.com.au/dont_say_we_didnt_warn.html

rofl i remembered this ad, and though it would be perfect for this debate rofl hilarious:

anyone seen the solo add, with the guy going for a test drive then he;s like: oh shit, its a manual?!?!

http://mancans.com.au/dont_say_we_didnt_warn.html

lol, now my research indicates that if u drive a manual u have man cans. but all is not lost, help is available

Common sence tells me that the guy cant drive a manual so he gets man cans, True???

yep, couldnt find that specific ad. story- finds a v8 ute, goes for a test drive, opens door.

crap, its a manual!?!?

=man cans :w00t:

I personally prefer manual, just makes driving experience more fun, and u have more control over the speed of the car. but i wouldnt turn down an auto/tiptronic R34 :)

I like manuals too. Once I figure out how to get out of first gear i'll be stoked..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...