Jump to content
SAU Community

Recommended Posts

did you noticed the blue 244DL last night, when we were heading back to your place from BWCP?

It was quite hot...

Nah missed it im devoed, too busy racing teh r8

hey r33 cruiser i was reading sunnycoast website and it said u have a few mods like

"it also has some engine mods= t4 turbo, nitrided crank, 3inch exhaust, 720cc injectors fmic, in car dvd player, custom boot install, ssq bov, twin plate clutch with a billet flywheel and will soon have a vta screamer pipe"

u also said

"yeah, had it dynoed at supertune on the gold coast about 4mths ago at 301.32 rwkw. but i can feel that i need another tune, that was on 25psi"

LOL interesting.....

hey r33 cruiser i was reading sunnycoast website and it said u have a few mods like

"it also has some engine mods= t4 turbo, nitrided crank, 3inch exhaust, 720cc injectors fmic, in car dvd player, custom boot install, ssq bov, twin plate clutch with a billet flywheel and will soon have a vta screamer pipe"

u also said

"yeah, had it dynoed at supertune on the gold coast about 4mths ago at 301.32 rwkw. but i can feel that i need another tune, that was on 25psi"

LOL interesting.....

nice 1 brudda! must be a weapon, what is it making now?

hey r33 cruiser i was reading sunnycoast website and it said u have a few mods like

"it also has some engine mods= t4 turbo, nitrided crank, 3inch exhaust, 720cc injectors fmic, in car dvd player, custom boot install, ssq bov, twin plate clutch with a billet flywheel and will soon have a vta screamer pipe"

u also said

"yeah, had it dynoed at supertune on the gold coast about 4mths ago at 301.32 rwkw. but i can feel that i need another tune, that was on 25psi"

LOL interesting.....

Is it one with the new hektic rb26304dettttt from teh new gtr?

For a $100k? Commo it was pretty slow. Damn it sounded like ass too

is that the clubsports that are that much or the gts or both? i know that they are overpriced shitas

yea mate save a few pennies and get ur seld a ebc, the greddy profect bs are good bang for buck...350 i think they are brand new...

unless ur looking for a cheap alterntive job and i got a bleed valve here u can ahve for 10 bux lol. hardly used...

Edited by Sr PWR
$150-200 at any jap yard. kawana jap wreckers have helped me twice.

my magna.. snapped wire and fkd the cogs. new wiper assembly was about 150.

in my silvia burnt motor and snapped wire. new electrical window winding assembly was about $150.

shop around. theres alot of help out there

Rang up that Jap place......Totally Imports...they rang around the Sunshine Coast and Brisbane and couldnt find a part.... Not too much help out there.

Rang up that Jap place......Totally Imports...they rang around the Sunshine Coast and Brisbane and couldnt find a part.... Not too much help out there.

just jap in sydney has them, and they will ship it to you

Rang up that Jap place......Totally Imports...they rang around the Sunshine Coast and Brisbane and couldnt find a part.... Not too much help out there.

Take it to a mechanic, they may be able to find a replacement motor that is similar to the one u have. You never know...might be the same price as getting the new motor. I think its worth enquiring about :(

"Anyone know if anyone is selling a R32 GTST wastegate actuator, need to up the boost."

rabbitt are u sure u want to up the boost on a stock as a rock r33?

doesn't nissans R&R come into effect at over 10psi?

you should get a tuneable ecu.

"Anyone know if anyone is selling a R32 GTST wastegate actuator, need to up the boost."

rabbitt are u sure u want to up the boost on a stock as a rock r33?

doesn't nissans R&R come into effect at over 10psi?

you should get a tuneable ecu.

Will be getting a intercooler in the next few weeks and exaust is being upgraded at the same time, then will be fitting the HKS adjustable actuator and then will be getting it all tuned on the dyno to make sure everything is right.

I think that is all i need for now?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...