Jump to content
SAU Community

Recommended Posts

Hey,

Im looking for a place which can refill C02 bottles, i will be using the smallest standard Co2 extinguisher bottle size (if that matters).

I am aware i can get it refill at BOC gas but i belived the price is alittle high.

If i remember correctly paul was talking about where to get it done cheaply At dragwars?

Thanks Michael

Link to comment
https://www.sau.com.au/forums/topic/142353-co2-refilling-station/
Share on other sites

Is it just straight co2? any idea what the fill point looks like? doubtful, but depending on the type of fill nipple might be able to get it done at the paintball field.. like I said though, doubtful. I imagine the fill point to be similar to that on my HPA tank which is a different fill point to my co2 tank.

its N2O mitchy :woot:

We have big CO2 bottles for kegs at work and they only cost like $30 to fill. There about half the size of a scuba tank. I'm not sure where they get filled but BOC would be the best best, it'd cost like $20 tops. Welding stores might also be another one, I think they use co2 sometimes aswell.

Is this for a homemade inter cooler sprayer? I was thinking about doing it with water but this looks like way more fun :O

I'd just do it for the CO2 purges >_<

Generally any pressure vessel has to be hydrostatically tested every 1-3 years depending on the type of vessel and it's contents. Off the top of my head the HPA cylinders I use for paintball have to be tested every 3 years. If they are not in date you will be refused filling.

I asked at work about the keg CO2 bottles. Bottles are 2.6kg and $260 to buy, they fill them in an exchange program. Its $20 to get it filled at beer tech (sp?) in Balcatta.

I wouldn't mind trying this if you ever find someone that will refill retrofitted fire extinguishers. Ebay has a few nitrous solenoids that would work (and can be used for nitrous ;))

If you could successfully get the retrofitted fire extinguisher hydrostatically tested, there should be no problem getting people to fill them.

If you want I can find the details of the guys we use to get our tanks tested.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...