Jump to content
SAU Community

Recommended Posts

hey mate i'm looking for a gtr or trust front bar for my gts-t, where can u get the gtr front bar for 250???

thats a pretty good price man, everywhere i look its around 500. Let us know im keen on this aswell

but i found some good deals though, i can get a front bar (fibre glass) for 250 so its not 2 bad, ...

thing is fibre glass is like paper, it cracks really really REALLY eazy trust me, thats why gtr front bars are so expensive because they are tough. I can get you one for 300, its 250 for me because a friend does it.

as for those rear and front guards, where are you guys located??

  • 2 weeks later...

yea so you can make your 32 gtst wide like a gtr for 1500 (including labour and perfect fitting) as for the extras you would pay something like 1.5g for the complete kit. Bear in mind that most of the parts would be made from fibre glass. So when it all ads up save 3g and you got your self a gtr look alike, then all i need is a rb26 and its all good :) tnx for all the info guys i appreciate it alot

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...