Jump to content
SAU Community

Recommended Posts

Hi all,

I'm selling a pair of ball bearing Garrett turbos to suit RB26DETT - GTRs. They come complete with 1bar rated actuators, modified oil drain flange pipes, and most gaskets, so all you need to fit is maybe a few gaskets and some patience!

I purchased these turbos not long ago, they're the only reason i'm selling them is that they're probably a little too big and therefor laggy for my current plans. That an i got an exhaust leak and i have had to remove them!!! ;):rofl: If sold i'll probably be going through the headache of a big single conversion.

Turbos are located in Townsville North QLD and i'll pay the freight to anywhere in australia if they're sold. and if i get a good price i'll even throw in brand-new un-used genuine nissan head-manifold gaskets.

They're rated at 320hp a piece and the part/chra number is 707160-005. According to the retailer that sold them to me theyre similar spec to the GT28RS but with smaller housings.

They come on like a freight train at 4-5k and above 5k they keep going and going.. They've never really gotten a proper chance to perform in my car, but I have done a 12.1 at 114mph with around 1 bar.. but they were maxing the injectors out pretty hard for most of the strip! Capable of soo much more!

Theyve seen less less than 4,000 kms of use i'd estimate.

If no one offers a reasonable amount they'll be refitted to the car.

More specs at :

http://www.turbobygarrett.com/turbobygarre...0R_707160_5.htm

I'm looking for offers around the $2,500 mark, which is lots less than what i paid not long ago. Call me and lets talk.

Please contact me, preferably ASAP and by phone, coz soon i'll be too tempted to fit them back to my car.

Call, 0402.701.181.

Cheers

Rob

Here is a picture of one of them next to my an original standard gtr turbo.

post-21092-1163219734.jpg

Link to comment
https://www.sau.com.au/forums/topic/142862-fs-twin-turbo-gt2560rs-near-new/
Share on other sites

A mate of mine tuned an R33 GTR, which had a pair of these and it managed an impressive 410kw at the wheels with these turbos on 1.8bar. This shows with a few mods these should be the last turbos you'll ever need to buy.

:pirate:

A mate of mine tuned an R33 GTR, which had a pair of these and it managed an impressive 410kw at the wheels with these turbos on 1.8bar. This shows with a few mods these should be the last turbos you'll ever need to buy.

:pirate:

wow thats unreal power! so would these be better than gt2860r with -5 version?

i can vouch for these turbos!

i have a set on my GTR and with a full turbo back exhaust and boost, the car ran 11.7 (on 4 occasions)

good luck with the sale mate - very good price!

cheers Garth

jebus, someone loan me the money. these would be perfect for my RB30/26 engine.

*shakes fist at buying house before finishing engine*

let me know if no one takes em before u refit them to your car, ill try and sell something or beg for money to buy them off you.

cheers

Daniel

Hi all,

I'm selling a pair of ball bearing Garrett turbos to suit RB26DETT - GTRs. They come complete with 1bar rated actuators, modified oil drain flange pipes, and most gaskets, so all you need to fit is maybe a few gaskets and some patience!

I purchased these turbos not long ago, they're the only reason i'm selling them is that they're probably a little too big and therefor laggy for my current plans. That an i got an exhaust leak and i have had to remove them!!! :no::P If sold i'll probably be going through the headache of a big single conversion.

Turbos are located in Townsville North QLD and i'll pay the freight to anywhere in australia if they're sold. and if i get a good price i'll even throw in brand-new un-used genuine nissan head-manifold gaskets.

They're rated at 320hp a piece and the part/chra number is 707160-005. According to the retailer that sold them to me theyre similar spec to the GT28RS but with smaller housings.

They come on like a freight train at 4-5k and above 5k they keep going and going.. They've never really gotten a proper chance to perform in my car, but I have done a 12.1 at 114mph with around 1 bar.. but they were maxing the injectors out pretty hard for most of the strip! Capable of soo much more!

Theyve seen less less than 4,000 kms of use i'd estimate.

If no one offers a reasonable amount they'll be refitted to the car.

More specs at :

http://www.turbobygarrett.com/turbobygarre...0R_707160_5.htm

I'm looking for offers around the $2,500 mark, which is lots less than what i paid not long ago. Call me and lets talk.

Please contact me, preferably ASAP and by phone, coz soon i'll be too tempted to fit them back to my car.

Call, 0402.701.181.

Cheers

Rob

Here is a picture of one of them next to my an original standard gtr turbo.

post-21092-1163219734.jpg

hi mate im not sure how much you paid for these turbos but when i had purchased them 8 months ago i paid $2200...i just looked through ebay and some1 is selling them for $2550 brand new.

but good luck with your sale

Sorry to the people who pm'ed i've been out of town for a few days.

I understand that 2.5k is a little on the exxy side what with the prices these are going for these days. And I'm willing to conceed that obviously its pointless expecting anywhere near the new price, but looking due to the fact that there is absolutlely nothing wrong with these units and added to that, the costs i have to meet to replace them means i could probably only go as low as $2300.

The only reason i'd be selling these is to convert to a single turbo setup and realistically i'm looking at over $4k to purchase what i need.

So I take it on board that $2500 is too much and i'll adjust the pricet to $2300.

Thanks for the replies.

Robbo.

  • 2 weeks later...

MrFlex the fact that these turbos retail for $2500 a pair has already been noted.. Please read the thread, but thanks for the bump.

Unfortuantly I've decided to keep them, after a few very good offers, Ive decided to keep them anyway. The cost to replace them is just too much for me at the moment, these are good turbos, just a little excessive for what i want at present.

Thanks again to the people who made legitimate offers.

Cheers,

Robbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...