Jump to content
SAU Community

Recommended Posts

I use motul, seems lots of import users use that, ppl say its better then shell helix, bloody expensive though but worth it for ur baby :P fully synthetic of course. i think the rating is 5w40 or sumthin. so it starts easy and remains the same throughout the rev range. its doin well cos i was on the track yesterday doin laps and the only thing that overheated in my car was the CAT, i think i destroyed the stuff inside it which means POLLUTION (oh well) :P

Clint-O

Motul 8100 Synth - $55 from Autobarn (UAS wanted 65)

NGK Iridium Sparks - $13.50 each

Ryco Fuel Filter

Ryco Oil Filter - $9

Nulon Radiator Fluid *Make sure you definately check your coolant levels*

My car seems to run better milage with the ryco filter, and the oil holds better, prolly due to oil quality, UAS said the genuine nissan oil filters are better and arnt that much more expensive ~$13

Try and get a 100% synth oil no matter what, they warm up quicker and can move more freely around the vital areas.

  • 4 months later...

back from the dead...

so we've established that a fully synthetic oil should be used, but what weight/thickness should be used? i believe it should be heavier/thicker than the oil in a RB25DET, which people on this forum generally agree should be 5w40, but i can't find any info on the RB25DE.

i've just done my first 5000kms so i need to change pretty soon.

has anyone got a workshop manual that states what oil nissan recommends?

Cheers,

Greg

Guest RedLineGTR

5w-40w

the 5w is the thickness of when the car is cold and starts up..so having a thick old for startup dosent really help at all to lubricate the engine when its cold and causes more wear on startup from cold. the 40w rating is the highest temp or how thin it can get and the high temps.

The only oils i would consider is 5w-40w maybe 5w-50w...10-40w and maybe 5w-30w also...nissan dealers have the original oil which is 7.5-30w which has a nice gtr logo on it.

thanks for explaining it all, i had a vague kind of idea that the numbers were idicating viscosity but didnt really know what that meant :D

the mobil site recommended Mobil 1 5W-50 for an RB30 (they didn't have RB25) and that sounds about right from what you and others have said. i'll look into the motul because a lot of people seem to be using it. me being a tightarse, it will probably come down to price when deciding between mobil1 and motul. anyway thanks for your help.

cheers

greg

ive just put shell helix ultra 5w-40, ive made out in the maual that they reccomend 7w-40, sumthing not very common in auto shops here! im thinking of putting 10w 40 in next time just to see if there are any differences. i thinking opf using mobil R next time round, its what they use in dads M3

Originally posted by Greg

hi all,  

I'm about to do my first oil change since compliance and since i don't have an owner's manual i was wondering if someone out there would be kind enough to post up what type of oil i should be using (ie weight etc). Is it the same as the RB25DET?  

Thanks,

Greg

Where can you get the owner's manual from anyway? I really need one of these ey.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
    • Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...