Jump to content
SAU Community

Recommended Posts

Following on from this thread in General Maintenance

http://www.skylinesaustralia.com/forums/in...&hl=window*

My drivers side power window has been playing up for ages and I have been trying to find the root of the problem. It would work most times, then all of a sudden just stop working. If I bashed the door handle and switch surround a couple of times it would sometimes start working again, but also sometimes not. Then it would work again for no apparent reason.

First I thought it was the switch mechanism, so I pulled it apart a couple of times and checked everything, and re-soldered anything that looked dodgy but it never fixed the problem.

I found the culprit to be the relay/switch (mentioned in the thread above)for the auto power window. If I moved the plug connected to the relay around a bit it would start working again. Interestingly though, there was always a ticking coming from the box when you used the window switch, whether it was working or not.

I didn't really have time to look at it properly when I first discovered it, so I cable tied the plug in a position where there was obviously a decent enough contact to get the windows working, and left it at that.

That fix was all working fine for a few months, but the other day I got stuck with the window down and it wasn't going up for love or money, so I was forced to take action.

I have taken some pics that may help others (the quality is crap)...this was the procedure:

Remove door trim -

- FIRST! remove the plastic cap in the armrest well and undo the screw located underneath, that is if it hasn't already been destroyed by some other monkey, in which case there will be a gaping hole where the plastic mount point used to be, so skip this step. Mine came broken :)

- Then, remove the plastic surround containing the window controls - there is a plastic clip underneath the centre of the surround holding it down so just lift from the outer edges in the middle until it pops out.

- Next, remove the surround from the door lever/lock mechanism as outlined in the pic

- Then, remove the three screws at the bottom of the trim as indicated in the pic and pop the push clips out on either side of the door. Then remove the door trim by lifting out and up from the bottom.

Locate and remove relay -

- Locate the relay to the right of the handle. Remove the plug and two screws holding it in place

Dis-assemble and repair relay -

- Lever the end off the relay with a small screwdriver or other weapon of choice. Pic shows lever points :P note the care and patience taken :D

- The relay PCB is just sitting in there on some plastic runners and slides out easily. Remove and check all the soldier joints on the back for anything suspect looking. Mine was pretty obvoius as shown in the pic below

- Re-solder anything that looks dodgy. BEFORE you put it all back together, plug it back in to the loom, connect your window switches and make sure it works. If so, re-assemble the relay and put everything back on in reverse. If it's still not working :laugh: set the car on fire and call the insurance Co. ;)

post-8870-1163989084.jpg

post-8870-1163989138.jpg

post-8870-1163989238.jpg

post-8870-1163989380.jpg

post-8870-1163989603.jpg

post-8870-1163989718.jpg

post-8870-1163989920.jpg

post-8870-1163989946.jpg

post-8870-1163989967.jpg

post-8870-1163989993.jpg

post-8870-1163990009.jpg

Edited by Lazy-Bastard
  • 2 weeks later...
  • 2 weeks later...

Hi.

I have a simular problem with the drivers side window.

What I found was a variety of problems.

Located the relay controller and resoldered 5 or so fractured solderjoints.

Just for the record, a fractured solderjoint is a fracture around a leg typically associated with mechanical vibration.

I am only saying this to make people aware that the fracture appears as a hairline crack, sometimes hard to see around typically the 2 relays as in my case.

Resoldered all connections to both relays.

Needless to say, the window failed to operate. (stuck in the raised position)

Next approach was to locate the power wires to the actual motor, seperate the plug and apply power directly to the motor.

The motor "ticked" and got hot.

This could indicate 2 problems.

1) motor stuffed and/or 2) regulator mechanism jammed.

My problem at this time is to remove the window regulator which requires the window to be in the lower position.

No motor, no operation. Pain in the butt.

Before I attempt this repair, I will want a replacement motor in hand because if i'm going to all this trouble, I will fix/replace it before reassembly.

Now, does anybody know where I can get a motor only. I don't want to purchase a complete regulator assembly.

Pending on price, the motor can be rebuilt and rewired which I will look into once I have it out of the car.

James

  • 2 months later...
  • 4 weeks later...

my window didn't work when the car was purchased.. i resoldered a few joints which fixed the problem.. a few weeks ago it stopped working again so I noticed a few more dodgy solders.. (probably mine).. i fixed these but recently i have noticed i have to hold the switch for a few seconds and press a few times before the window will go up.. going down is fine but up was delayed...

today when the window was about 1/3 of the way up it got really sluggish and stopped.. it went back down i tried again and it got stuck again.. now its stuck in the down position. I checked the solders, this time they seem fine so I'm thinking its the motor..

does anyone know if the relay contacts move, would this indicate that the relay is fine and its the motor? or can the contacts move and still be the cause of the problem?

cheers!

  jjjDavey said:
does anyone know if the relay contacts move, would this indicate that the relay is fine and its the motor? or can the contacts move and still be the cause of the problem?

cheers!

The relay should work regardless of the dodgy soldering in the black box. I can hear my relay tick over and the window does not work due to those bad soldering points. As for it getting slow and stuck, your motor is either on its way out, OR you need to apply some dry lube to the runners to stop the friction. Otherwise if you keep it the way it is the motor will eventually burn out anyway.

Can you hear a clicking noise when you push the window button? The clicking noise is the sound of the relay closing, if you can hear that then the relay should be OK.

The way the you described the window motion as being sluggish leads me to believe that the motor has burned out. If it was the relay I think it would have simply stopped and not slowed first.

yeh thanks..thats what i was thinking.. i have the relay taken out of the box and when i move the button i can see the contacts are moving up and down so i guess they are fine.

any ideas how to get the window up so i can use the car? seems impossible to manually move it..

Sorry mate, never had to do it before...

It should become clear once you attempt to get the burned motor out.

It might be the case that your motor actually burned out due to the window pane ceasing in the runners. Which would explain why you cant manually move it

  • 4 months later...

:rolleyes::):)

Thanks for the info, my window would work one moment and not the next. could give it a thump sometimes and then it would work for a while.

anyway, had two dry spots at the back of the PCB, who knew lerning to mod x-boxs would come in handy. so solderd them and away it went.

  • 3 weeks later...

Oh i need to mention that clicking noise if its stuck in the down position is the actual window motor burning out as i found out the hard way so carefull of that esp when the relay is playing tricks :P cheers

  • 9 months later...

This is gold!! I went 10 months with an on/off window which then was just off (thankfully up!) and after reading this I spent just half hour getting the relay out and soldering it and BAM!! I have my window back! Nice one dude

  • 1 month later...

yeaha my power window motor seems to be gone i can hear the relay but the motor was maing a loud eeeeeeeeeeeeeeeeerrrrrrrrrrrrrrrrrrrrr sound, but that has now stopped i guessing it burnt out...hmph

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...