Jump to content
SAU Community

Recommended Posts

the fcon sz pro i think it is, is pretty good, much like most of the hks ecu stuff but the problem is there are no local tuners, so you need to be in sydney and you only have like 1 or 2 tuners so they can charge you any price and give you any level of service they wish and you have no choice, you cant just walk away and go see someone else.

if there were lots of hks tuners in australia, sure go for it, but dont bother in australia, unless u have unlimited money, then if you do buy motec

Link to comment
https://www.sau.com.au/forums/topic/144512-hks-pfc-con/#findComment-2699990
Share on other sites

Not entirely true about the pricing... but I guess your concern Paul is very valid (per case application I guess)

I've had my car tuned twice now with the F-CON and both times the pricing has been extremely competitive when compared to elsewhere.

PM me if you want definite prices; think your mind might change afterwards.

Link to comment
https://www.sau.com.au/forums/topic/144512-hks-pfc-con/#findComment-2700006
Share on other sites

They're one of the only places I know of that guarantees their tuning... if anything stuffs up they tune it back for you without question.

But true, the towing from interstate if a problem occured would be a nightmare.

Link to comment
https://www.sau.com.au/forums/topic/144512-hks-pfc-con/#findComment-2700086
Share on other sites

"I've had my car tuned twice now with the F-CON and both times the pricing has been extremely competitive when compared to elsewhere"

were did you get this done what sort of tune did you get

i.e full tune or tidy up of a jap tune?

Ive been told that BD4's can not tune f-cons and they have a capboard full of ones they've removed from cars

I love to have been told the wrong info as my bosses gtr has one fitted and another 2 tough jap cars I know of have one fitted aswell

Link to comment
https://www.sau.com.au/forums/topic/144512-hks-pfc-con/#findComment-2701668
Share on other sites

Whoever has told you that BD4s cannot tune the F-CONs is full of it... they are the ONLY people in AUS who can and will tune the F-CONs.

You need to be a registered HKS Pro Dealer to even have the Power Writer software and BD4s is one of them.

Thomas Lee is their tuner and he knows his stuff... definitely worth giving him a call and talking to him. He'll give you his time as well unlike many other places who hurry to finish the calls.

What type of tune did I get? Well the F-CON V Pro came off a R34GTR so the tune was not compatible (not that I would have used it anyway) so I needed it tuned from nothing. Unlike the PFC there is no "base map" everything needs to be done from scratch.

My second tune was when I installed injectors etc etc... Most tuners would just modify their existing map - Tom did it from scratch again.

Both tunes lasted about 10hours each, and each time I've paid what most would expect to pay for a full PFC tune which I've seen done in even 1/3 of the time.

Link to comment
https://www.sau.com.au/forums/topic/144512-hks-pfc-con/#findComment-2702573
Share on other sites

Not going to start another debate about how good/bad F-CONs are but consider why most high HP cars from Japan use it over the PFC... also consider why a seemingly "piggyback" system would be preferred over a "standalone" ECU.

I was sceptical to start off with too... but after talking to Tom, seeing it done, and driving my car - I'm converted. Talk to silver r32gtst from here, he's running one too.

Link to comment
https://www.sau.com.au/forums/topic/144512-hks-pfc-con/#findComment-2702577
Share on other sites

I was previously using the fconv but am now using a power fc pro...

to me the flexibility of being able to choose my tuner is a big advantage...

i personally did not have a good experience with bd4s and would not go there again... although im sure other people are more than happy with thier service...

additional costs with the fcon are getting it wired in which has to be factored in as well

just some thoughts

Link to comment
https://www.sau.com.au/forums/topic/144512-hks-pfc-con/#findComment-2702591
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...