Jump to content
SAU Community

Recommended Posts

Hi all, been lurking for a couple of days so I thought I'd write a quick greeting and ask a question at the same time.

I am going to pick up a '95 R33 tomorrow, in a private sale. I've done the REVS check and it's all clear, but the certificate they give you only protects you from finance companies, it doesn't protect you from buying a stolen vehicle. So I was just wondering, is there any way to be guaranteed that you're not buying a stolen vehicle?

I'm almost certain that it's not stolen, because they guy who's selling it knows all the ins and outs of the car including a high-tech alarm/security system, but I just wanted to be absolutely sure one way or the other. I've only bought expensive cars from dealers before so I guess you could say it's my paranoia getting the better of me a bit. What I'm worried about really is that it's some elaborate scam which they've practiced really well. I know it's not likely, but as I said, my paranoia is showing through :rolleyes:

Can anyone give me any advice? Or should I just trust the RTA and REVS reports that it's not stolen, and make sure the receipt is done properly so that I have written proof that it was bought legitimately?

Thanks in advance,

Jim.

jim.. as far as it being stolen u can just do a check with rta etc. and look for things like engine numbers being grinded off etc..

try ringing up one of the importers like justjap or others.. adn ask them for info as to chekcing weather or not the car might have been stolen in japan.. ?? i think that would be ure biggest problem rather than being stolen in aus!..

by the way were in west ryde u from?? i used to go to west ryde public and marsden :rolleyes:.. ahhh the good old days

Thanks for the info :rolleyes:

We couldn't actually find the engine number, the even my friend who's owned an R33 for the best part of a year doesn't know where the engine number is! We think it must be under a heat shield or something. But the VIN checks out fine, and that's the important thing. Worst case situation if the engine is stolen I can buy another one for under $3k from a second hand wrecker in Qld (shipping might cost a bit though :mad:)

But seriously, I don't think it's stolen (touch wood). It's just that with this much money being thrown around I want to be as sure as I can possibly be that it's going to be fine. The car has been here and registered for over 2 years so I don't think I need to worry about it having been stolen in Japan, surely they would have tracked it down by now.

Anyway I'll give the RTA and/or cops a call and see what they have to say. I actually looked at the RTA site and they say that REVS will say if the car has been stolen or written off too, just the certificate doesn't cover you for those situations. I'll just check as many things as I can and leave it at that.

Thanks again!

Jim.

P.S. Oh, I'm near Meadowbank. I've only been here for a bit over a year, before that I lived in Fairfield.

  • 2 weeks later...

engine number on R33 is a pain in the butt. Get a torch, when standing in front of the car looking into the engine bay it is on the right hand side, right at the back near the firewall, close to the back of the heatshield the turbo sits under. :D I had to find it at the RTA up here when I first got it registered as the bird from the RTA had no idea.

So you finally sold the commodore and jumped on the Skyline bandwagon? :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...