Jump to content
SAU Community

Recommended Posts

pager alarms are good when u park your car @ work or at shopping centres etc. your pager would go off when the alarm goes off. I forgot the range of the pager, but I know that it can reach longer then 5 blocks of houses.

Link to comment
https://www.sau.com.au/forums/topic/14498-alarm-system/#findComment-298428
Share on other sites

yeah thats the sole reason i want car alarm

in case some stooge does a hit and run

its a pretty good alarm apachex

comes with all the standard adjustable shock sensors

engine immoboliser and stuff

jus has a crappy brand name and crappy looking remote

Link to comment
https://www.sau.com.au/forums/topic/14498-alarm-system/#findComment-298619
Share on other sites

pager alarms are good depending on wat they run on gsm

or radio frequency

forget the radio frequcny ones the bounce of walla and reflect off windows not that good if anything you would want to go for a gsm one

there was a post awhile ago about place caralarm place rojan or somthing that has a gsm pager and it rings your mobile etc really good

id go somthing like that

to be honest

Link to comment
https://www.sau.com.au/forums/topic/14498-alarm-system/#findComment-298623
Share on other sites

I think it is worthless getting a pager. A standard alarm with an immobilizer is good enough. If someone wants to break into your car, they are not going to take their sweet time. By the time you get there the damage would have been done, and the bastard(s) long gone.

Its a waste of good money. Spend it on something better.

Link to comment
https://www.sau.com.au/forums/topic/14498-alarm-system/#findComment-299726
Share on other sites

Originally posted by mash

I think it is worthless getting a pager. A standard alarm with an immobilizer is good enough. If someone wants to break into your car, they are not going to take their sweet time. By the time you get there the damage would have been done, and the bastard(s) long gone.  

Its a waste of good money. Spend it on something better.

but think about it..your going shopping with your galfriend for...lets say.... 3 hrs.....and when u went in the stores, BAM, someone decides to try and take your rims, instantly your alarm goes off and your pager goes off as well. You would be running out there ready 2 smash whoever is near or running away from your car. But if u didn't have a pager, u would stll be shopping and the other guy would c if noone comes back and trys again and take your rims.

A pager does make a difference..it's better 2 know when someone is breaking into your car now then later.

Link to comment
https://www.sau.com.au/forums/topic/14498-alarm-system/#findComment-300037
Share on other sites

also

say you park yer car in shopping centre

and you go in to buy stuff

and some stooge smacks yer car

you can come running out in full glory and find the ****er before he does a runner

seriously pager alarms are useful

and for $250 thats not much more expensive than a normal alarm with immoboliser

Link to comment
https://www.sau.com.au/forums/topic/14498-alarm-system/#findComment-300582
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • R32 pics Not sure if you can upload pics directly, but i've added them through an imgur link above.
    • There’s a possibility that Infinity G35x front hubs may be compatible, but it depends on the exact fitment. Sometimes, parts like hub and bearing assemblies from different models can work if the bolt patterns, bearing sizes, and axle specifications match, but the G35x hubs typically have a different design. It's worth checking detailed specs (like the number of bolt holes, size of the axle shaft, and bearing diameter) to compare, as Rock Auto does list some parts that cross over across different models. If you're going for a pre-pressed hub and bearing unit, that could be a good option. These units are usually easier to install, as the bearing and hub come pre-assembled, but you’ll still need to verify fitment, especially the outer diameter of the hub and bearing dimensions.
    • Love the input man! Defo gonna check it out
    • 1994 Series 3 R32 GTR. Freshly built as the perfect weekender. Has many brand new Nissan OEM pieces (some you can no longer source). Last serviced (April 2024) at V Spec Performance, Melbourne, Australia. Feel free to DM me if any questions. Asking price: $190,000 AUD.  Engine RB26DETT Original 05U block Factory R32 crankshaft CP 86.5mm forged pistons Spool forged rods Factory cylinder head – rebuilt Factory valve train Factory camshafts Factory inlet manifold Factory throttle body Garrett dash -5 turbos Custom intercooler piping with Plazmaman clamps Plazamaman 100mm race intercooler Turbosmart BOV Tomei fuel rail 660cc injectors Goodridge 9000 series fuel lines with crimped fittings Stainless steel front pipes Tomei titanium exhaust with stainless steel cat converter Spit fire coils Powder coated rocket covers New Nissan coil pack emblem badge Fully repainted engine bay in Factory Black Refurbished ABS unit New Nissan brake master cylinder New Nissan brake lines New Nissan clutch master cylinder New Nissan washer bottles Custom catch can (powder coated with Goodridge lines) Steering rack rebuilt New Nissan power steering lines New Nissan AC lines A/C compressor refurbished AC condenser refurbished HPI radiator and new thermos fanes New radiator fans NOTE: All nuts, bolts, fixings new or zinc coated Driveline Factory 5 speed gear box rebuilt Xtreme twin plate clutch Stainless steel clutch line Rebuilt factory transfer case Custom one-piece tail shaft Rebuilt factory front diff Rebuilt factory rear diff Suspension HICAS deleted Bilstein dampers IKEYA formular front and rear arms and tie rod ends New bushes wherever possible Whiteline anti roll bars (underneath car only) Brakes Brembo F50 front callipers – 4 piston AP racing 380*32 front rotors, J Hook design Custom floating hat and calliper mounts Brembo 4 piston rear callipers PFC pads Stainless steel braided brake lines Body New Factory Black paint job Ceramic coated exterior panels New Nissan aluminium bonnet (super rare) New Nissan headlights (super rare) New Nissan indicators New Nissan front bar New Nissan front lower lip New Nissan head light and bonnet seals New Nissan windscreen cowling New Nissan wiper arms and wiper blades New aftermarket windscreen New Nissan windscreen seal New Nissan front doors window surrounds and seals New Nissan rear quarter windows (must replace for proper paint job) New Nissan rear window surrounds and seals New Nissan side skirts New Nissan boot badges New Nismo rear bonnet lip New Nissan guard liners Interior New Nissan lens cover over cluster New Nissan gear boot shift New Nissan gear knob New Nismo steering wheel New Nismo floor mats New Billet Handbrake lever New Nissan OEM pocket facia to replace radio Underbody Original stone guard removed and new stone guard coating applied Powder coated front and rear cross members Fuel lines painted to match factory colours Fuel tank removed, cleaned, repainted and refitted All nuts and fixings cleaned, repaired and zinc plated Wheels Rays/Volk racing TE37 18 x 10.5 + 15 in Bronze Yokahama A050 265 x 35 x 18                         
×
×
  • Create New...