Jump to content
SAU Community

Recommended Posts

i have t 70 turbo in brand new condition never used , with custom oil braided lines to fit rb engines . lines and fittings cost me $250 by them self so grab a bargain

the lot

$600 :mad:

0421047935 sms or email me to [email protected]

post-27549-1164638153.jpg

post-27549-1164638175.jpg

post-27549-1164786373.jpg

post-27549-1164786396.jpg

Edited by iwon

was fitted to my project car but i ran out of money so pulled everything off it but i never got to even start it with it as i couldn't afford to get the car wired up . . come and check it out for your self if you don't believe it . thanks

u sure its never been used, that exhaust housing looks like its seen some action.

i see these same turbo's going for around $300-400 on ebay...seems rather cheap for a brand new turbo...is there anything wrong wif these turbo? ..will it have massive lag on a stock standard rb25det?

nah they hit boost at around 4000 rpm but come son hard too .i have few mates that run same turbo on rb20 n rb25 and it goes really hard .

i see these same turbo's going for around $300-400 on ebay...seems rather cheap for a brand new turbo...is there anything wrong wif these turbo? ..will it have massive lag on a stock standard rb25det?
nah they hit boost at around 4000 rpm but come son hard too .i have few mates that run same turbo on rb20 n rb25 and it goes really hard .

4000rpm??? bejezuz..thats some lag there....did u mean it peaks at 4k rpm or just boost starts coming on at that rpm?

look if your wondering about these turbos do a search in the forced induction section instead of asking questions here you will get all your answers there gl with sale

hits ful boost on at 4000 and when it come on hold on these babys come on like a mofo they boost from 800rpm and full boost at 4000 yes there is a lil lag but go good when installed correctly

thanks alot mate .so many people asking same question over and over again .

look if your wondering about these turbos do a search in the forced induction section instead of asking questions here you will get all your answers there gl with sale

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...