Jump to content
SAU Community

Recommended Posts

dsc00416bj6.jpg

dsc00418nr1.jpg

dsc00419nc1.jpg

dsc00420fp2.jpg

dsc00421nc4.jpg

dsc004225xw8.jpg

r32 40mm widebody vented fiberglass gaurds need a bit of fiberglass work pm me for details $120

r32 m spec rear pods now in white 2 pack high fill primer also have side skirts

r32 stock rear bar $80

rb20det stock injectors 2 sets $50 each set

rb20det stock afm $65

rb20det stock turbo and dump pipe to cat turbo in ver good condition $170

work twings 17x8 front and 17x9 rears brand new tyres on rear and fronts are still legal chrome lip and silver centers (Centers have minor gutter rash)have origional work caps and all tags on rims will sell how they are for $950 or with black centers and the chrome lips and gutter rash repaired for $1000!

rb20det heads $90 each in vgc silver tops complete with rockercovers and cams

stock rb20det air box set up with brand new filter!

r32 g sensor in perfect condition

r32 gts-4 wing $40

rb20det turbo manifolds 2x $40 each

rb20det bottom half intake manifold $40

rb20det throttle body $50

gts-4 4wd sump diff has been pulled apart but all parts are there $150

gfb boost controler $35

Edited by OGR88 R32

yeah i guess its easyer to put it up here then pm everyone about it :( ok only problems 1 they need a good sand before paint and the 2nd is the one mount neer the door has broke off on both easy enough to fix but ive never used it anyways this is how they looked on my car

post-29528-1165745937.jpg

  • 5 months later...
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hell, I'm sufficiently wary of the ZSS suspension arms, let alone something like a hub.
    • Got it back home and got started pulling the hub off and diagnose the issue. Axle was stuck after removing the 36mm nut so i used a 3 jaw puller to try and push it out and... eH5FXvJ8.mp4   spend the next few hours trying to remove the axle from the remaining hub as it was very much jammed in there when the spindle sheared off. resulting damage as below R53AIy6 - Imgur.mp4   Looks like the was already a stress fracturing in the spindle as can be seen with the darker cracked section My working theory is maybe when the pinion gear exploded last year the shock put through the hub was the initial crack. Then a few events later it finally let go. Just lucky it happened where it did and not 190km/h on the next sweeper or into the hairpin The bearing/hub assembly went in in 2019 and were non-genuine "ZSS" assemblies and no nails were harmed in the process. #BreakHubsNotNails
    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
×
×
  • Create New...