Jump to content
SAU Community

Recommended Posts

New n1 turbos for gtr and power fc with hand controler

location is on the gold coast

reason for selling im upgrading to a massive single turbo and a link computer

price $2000 for the n1s and $900 for the power fc or you can have both for $2700 i am open to offers

turbos come with brand new 3inch stainless dump pipes and come with all the lines and both manifolds

will have some pics up in a couple of dayz

contact me on 0410189246 ...... ask for luke

..........................................................ALSO OTHER PARTS AVAILABLE.......................................................................

.....

.......................................price drop..............................................

Edited by turbobmw
Link to comment
https://www.sau.com.au/forums/topic/146834-new-n1-turbos-and-power-fc/
Share on other sites

whats the serial number on the turbo's?

hey bro pulling the turbos off tomorrow can tell you then ........if you build it , they will come ......amen to that

Edited by turbobmw
yeas... R34 N1s are Ball bearing.

and bigger

EDIT:

BNR32 (NISMO)......Serial No. 14411-06U00 (F/M273 deg. plain thrust bearing centre)

T04B Compressor with a 0.42 A/R and 62T

T25 Turbine with a 0.64 A/R and CD79

BCNR33 (N1)......Serial No. 14411-24U10 (F/M360 deg. plain thrust bearing centre)

T3 Compressor with a 0.42 A/R and 55T

T25 Turbine with a 0.64 A/R and 62T

Included this for information...all R34 GTR's are Ball bearing turbo's...all previous models are only plain bearing.

BNR34 ......Serial No. 14411-AA300 (Ball bearing centre)

C100 Compressor with a 0.53 A/R and 50T

T25 Turbine with a 0.48 A/R and 62T

BNR34 (N1)......Serial No. 14411-AA401 (Ball bearing centre)

BNR34 (N1)......Serial No. 14411-AA402 (Ball bearing centre)

BNR34 (N1)......Serial No. 14411-AA403 (Ball bearing centre)

C106 Compressor with a 0.60 A/R and 55T

GT25 Turbine with a 0.64 A/R and 62T

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...