Jump to content
SAU Community

Recommended Posts

anyone know what power the stock injectors max out around on a rb25det?.

and how valuble is the VVTi. ive gotta rb20 ecu i can use to tune it up, but not sure about losing it. i know its activated by oil pressure, but is there also a 12v or 5v input which switches it on kinda like the vtec, cause if thats the case then i can use a RPM switch to turn it on.

Yeah they max out at 100% duty just like every other car...

Sorry, I had too.

I've heard around 180rwkw is pushing it? Might be able to get that or a higher more safely with increasing the pressure regulator?

The stock fuel pump would also be an issue too.

Best to get your car on the dyno as you're upgrading its power levels to watch your injectors and pump.

r33 gtst injectors will max around 250rwkw

they will be on their knee's at this power level

you can get a bit more out of them by upgading the fuel reg to bump the rail pressure up a little bit

vct on the r33 is based on rpm, on until 4700rpm then it switches off

with it off the car drives like a bucket of poo, much less response and zest

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...