Jump to content
SAU Community

Recommended Posts

I've noticed that my GTR's acceleration in second is no longer smooth. It starts boosting and then suddenly drops for a split second and then again and again all the way to the redline.Does any one know what could be causing this. I did take the boost restrictor out but it was fine for ages before this happeed.

Link to comment
https://www.sau.com.au/forums/topic/148554-jerky-boost-on-gtr/
Share on other sites

I've noticed that my GTR's acceleration in second is no longer smooth. It starts boosting and then suddenly drops for a split second and then again and again all the way to the redline.Does any one know what could be causing this. I did take the boost restrictor out but it was fine for ages before this happeed.

do you have std coils?

when did you replace the plugs last?

you should try running a spark plug gap of about .8mm should help if it is dud coils

yep sounds like the common old Coil packs cracks. the spark arcs out instead of firing the spark plug ... I would say it it has happend due to the extra boost and heat your generating from removing the restrictor ... Same thing happend to me

I replaced the plugs about 15,000km ago and i'm runnng standard coils

Does regaping plugs solve this problem or is it just banaid solution.

Also, roughly how much are new coils?

do you have std coils?

when did you replace the plugs last?

you should try running a spark plug gap of about .8mm should help if it is dud coils

You can get new splitfire coils for just over $500 a set delivered

And try changing your plugs aswell as i think copper plugs are only good for 10,000km. I change mine every 5000km when i service the car as they are only an extra $20 or so.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...