Jump to content
SAU Community

Recommended Posts

Im interested Upgrading my stock exhaust system, i have a stock r34 gtt auto coupe. I was wondering if i bought the front/dump + the high flow cat and leaving the stock cat back be, power wise compared to just doing the cat back.

id just like to know wat power gains id be looking at if i do this combo system or whether going with the cat back is better bang for buck.

I was maybe thinking of keeping the std muffler look on it if the front pipe/dump/split + cat make more of a difference than the alone cat back. I know the cat back will give me more sound but i only am looking for that slightly deeper sound when she goes. >_<

im probably not into doing the whole system from the turbo back so id like to know which setup will be more gains verses costs.

Any info or ideas will be great!

thanks

Link to comment
https://www.sau.com.au/forums/topic/149057-which-exhaust-setup-to-go-with-r34/
Share on other sites

i myself just got a cat back exhaust in my r34gtt and feel a difference in power..... like alot of ppl in here id say do the whole thing.... the rear muffler is quite restrictive.... power from cat back is said to be 10 rwkw or so...... i think theres more gain from doin the front dump and cat but u need the cat back to get the most out of it....

1) Turbo Back system... Apexi N1? Little over $1k I think

2) Go back to your importer/dealer - trade them your stock exhaust + cash for a better exhaust system :laugh:

My cat-back Trust PEII only cost me $300 from memory >_<

thanks for the replies guys,

hmm those prices sound pretty good compared to what i got quoted at bel garage, for the cat back hks silent hi power i got quoted $1K included fitting. The Reason why i wanted that system is because he said it has some built in silencer that doesnt make it sound too droney and mine being an auto i wouldnt want it to be that constatnt loud humm.

shudnt be too bad if i can find a good turbo back system @ $1K that makes good power and isnt too loud, just so i can still hear the turbo hehe >_< any ideas? What do most of you guys run?

Stan you guys can fitt them at your place too?

cheers.

i have a Hcr32

rb20det

i had a front dump pipe first and it made a world of difference to the way it spooled up, made it a lot better to drive day to day, but at the top end lost its pull

now i have a cat back wit standard cat (soon to be hi flow) and that made all the difference up in the rev range, it wasnt gettin choked up,

this is all in the last 3 weeks so the feeling is still fresh for me,

i liked the idea of having somethin so quiet, so find ur self a system wit silencers that made a bigg difference

the cat and catback/muffler are the 2 most restictive bits , do not underestimate how much your shitty compliance cat sucks power if you still have it

the dump/front is actually not bad for a stockie , you will get very minimal power gains changing it while still having a very restrictive cat sitting at the end of them

i got a trust pe II for my old r34 sedan from autobarn on special about 800$ delivered , you can fit yourself easy

Sorry to hi-jack...

But since we're on the topic of exhaust systems & this thread is still active I thought I might try my luck here...

Does anybody here have the 'nissan sports muffler' with silencer? There's an in-cabin switch that says 'sport & silent'

I'm planning on my exhaust now & I was wondering if anyone knows whether it's worthwhile to change it or if there's any need. At the moment I am planning on a high flow cat, split dump pipe & 3" piping.

I want to keep the sports muffler for the fact that it has a silencer & if I remove it then the in-cabin switch will be useless.

Any info is appreciated :cool:

Hey yo-yo. Yep i've got the nismo muffler with the silencer as well. Mine's seized onto wide open (thankfully).

It's restrictive but not as bad as you would imagine. I did the front/split pipe and left the original nismo cat-back and there was still quite a bit of flow, with a bit more of a gruntier note to it. The stock front pipe is where it gets really choked up. Anyhow, i'm going to a Trust PEII shortly.

Btw, leave the wiring for the silencer there, and perhaps you can use it with something like an apexi control valve later on.

Edited by Howie

Ok people,

Im deciding to either go with the trust pe2 or the hks silent hi power cat back systems. What can you guys recommend for a non droney, nice sounding, value for money system? which one would you choose? :laugh:

Ok people,

Im deciding to either go with the trust pe2 or the hks silent hi power cat back systems. What can you guys recommend for a non droney, nice sounding, value for money system? which one would you choose? :laugh:

Hi there,

I've just ordered the hks hi power silent for my r33 gtst - will be about 6 weeks until we'll fit - I'm hoping it'll be less droney than the existing one.

Cheers

Hey yo-yo. Yep i've got the nismo muffler with the silencer as well. Mine's seized onto wide open (thankfully).

It's restrictive but not as bad as you would imagine. I did the front/split pipe and left the original nismo cat-back and there was still quite a bit of flow, with a bit more of a gruntier note to it. The stock front pipe is where it gets really choked up. Anyhow, i'm going to a Trust PEII shortly.

Btw, leave the wiring for the silencer there, and perhaps you can use it with something like an apexi control valve later on.

Thanks Howie, you're a legend.

Just to confirm we have the same type of cat-back, It has a silencer where the in-cabin switch says 'sport' & 'silent.' On the side of the tip it has a plate that says nissan 'sports muffler' in running writing font, you called yours a nismo cat-back?

Did your silencer seize after you changed the dump pipe or before? If the increased flow caused the silencer motor to stuff up I might as well get a full exhaust anyway but I'm on a budget so I'd prefer to keep the sports cat-back if it's decent.

Cheers again mate :P

Just to confirm we have the same type of cat-back, It has a silencer where the in-cabin switch says 'sport' & 'silent.' On the side of the tip it has a plate that says nissan 'sports muffler' in running writing font, you called yours a nismo cat-back?

Yep mine's exactly the same one bud.

Did your silencer seize after you changed the dump pipe or before? If the increased flow caused the silencer motor to stuff up I might as well get a full exhaust anyway but I'm on a budget so I'd prefer to keep the sports cat-back if it's decent.

No that was always like that. I understand it's a common problem with the r34 nismo exhaust, to rectify you just spray wd40 and bang at it with a rubber hammer - i did that and it fixed it up for a while.

Cheers again mate :P

No worries at all buddy.

I also went CES dump/front with metalcat cat and apexi n1 muffler with 3" piping in between, in my opinion it is a reasonably quite system, only becomes loud when you really give it some. The gains were incredible though. Spool up quicker, better top end everything improved.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...