Jump to content
SAU Community

For Sale: Highly Modified R32 Gtr

mitchy
 Share

Recommended Posts

mitchy Contributor

mitchy

Posted
Posted (edited)

Guys and girls,

Most depressing, I am looking to sell my 1991 GTR to assist the purchase of real estate. It has been my pride and joy from day 1 and would not be looking to sell it if i didnt think i needed to. Still has original silver paint in very good condition and standard wheels. Makes for an unbelievable street car, and attracts no attention due to standard apperance and quiet exhaust. Has original speedo and km's of 125,000. Has been in oz for approx 8 years, unmodified for 6 years.

Looking for expressions of interest from genuine buyers

List of mods:

HKS GT-SS Sports Turbines - Ball Bearing 320hp each

HKS Split Dump Pipes

HKS stage 2 cams and springs

Twin 3" Front Pipes into single 3.5" Exhaust. N1 Style Muffler

N1 Oil pump

N1 Water Pump

OS Giken Triple Plate Clutch R3C

Lightened Flywheel

Genuine Nissan N1 Block ($3,500)

GTR Crank (replaced)

Adjustable Cam Gears

Apexi Power FC 'Plug N Play'

Apexi Electronic Boost Controller Kit

Apexi FC Commander Hand Controller

Apexi Super Intake kit for 80mm AFM's

Apexi GT Spec Intercooler (no longer in production) 136mm Thick

R33 Gtst 80mm AFM's <Used

Greddy/Trust Oil Catch Can

Greddy/Trust Intercooler Piping Kit

CP Forged Pistons

Tomei Metal Head Gasket

NISMO Fuel Pump

600cc injectors

Apline MP3 Headunit w/remote

Alarm System with Remote Central Locking

Bride Reclining Racing Seats w/genuine rails, nearly new

Nismo Duracon Gearknob

TEIN Super Street Coilovers (Adjusted for Australian Streets, Height and Dampening Adjustable)

Front Strut Brace

Michelin Pilot Preceda Tyres on stock GTR rims

Slotted Brake Rotors and Bendix Pads

Currently making around 350 hp at all 4, on only 1.2 bar.

I had plans to finish it off with tomei cams, injectors and a tune to see around 350awkw, but time and financial constraints have halted that progress...

I have all receipts for work done, totalling well over $20,000. Most work including rebuild performed by Gavin Wood Autotech in queensland, within the last 24 months.

I am looking for $26 900 for the car. Please direct all serious enquiries to my email:

[email protected]

Pics will be available within 5 days

Thanks

Mitch

Edited by mitchy
Link to comment
https://www.sau.com.au/forums/topic/149549-for-sale-highly-modified-r32-gtr/
Share on other sites
SRS13 Proficient

SRS13

Posted
Posted

Very nice car.

You wrote that it has HKS step 2 cams and 600cc injectors but you want to finish it off with Tomei cams and injectors for 350awk. Is that a typo or is the car not fully tuned yet? Who tuned it?

Thanks.

mitchy Contributor

mitchy

Posted
  • Author
Posted

I would go for 850cc injectors and twin fuel pumps along with with a set of tomei poncams. That said, the power delivery at the moment is phenomenal, yet another reason i never got to finish it off as i saw fit. I am sure that it has plenty more in it at its current state of modification.

Has been tuned well at its current setup, by gavin wood.

Thanks for the comments

Mitch

mitchy Contributor

mitchy

Posted
  • Author
Posted

Will consider offers close to the asking price, will take certain moto's as part trade to about $8000.

Car is well priced, even in the current market, considering 20k gets you a mildly modded GTR with a shakey history...

Mitch

mitchy Contributor

mitchy

Posted
  • Author
Posted

Sorry about the long delay on pics, have been at work every day. Here are a few, unfortunately its not a sunny day so really doesnt do the car justice. Will try to take some when the sun stays out for more than half a day...

Mitch

post-11190-1168660008.jpg

post-11190-1168660042.jpg

post-11190-1168660130.jpg

post-11190-1168660158.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...