Jump to content
SAU Community

Recommended Posts

Hi Guys

This is actually my first ever post on this forum.

I have just bought a 1998 R34 GT-T.

This is my first car since I wrote off my S15 13 months ago. Ended up losing my license for 12 months because of the crash.... Anyways, I am finally back in the driving seat.

Decided to go with a R34 as opposed to another S15, mainly to try something new and also because insurance on another S15 with my now "bad" driving record was ridiculous.

The R34 is completely stock standard. I have been driving it for less than 3 days now and have already decided that i could do with some more power and / or sports suspension support. They handle so bad compared to the S15.

My question is.... kepping in mind that I have $4000 to burn on mods right now, what do you guys think the money should be spent on to get the most out of my engine? Would love to get a bit more power out, (maybe just exhaust, air filter for now) does that addition make much of a difference on the R34?

Thanks heaps fellas

Link to comment
https://www.sau.com.au/forums/topic/149664-bad-handling-on-my-r34-gt-t/
Share on other sites

sorry, I forgot to ask my main question.

I don't know much about suspension, how do i minimise the body roll on my Skyline? I figured I need sports suspension of some kind.

Any ideas?

The car is all over the place....

See the group buy section for the SydneyKid suspension package, get the sway bars as well.

So stock for stock the R34 GTT handles worse than the S15?

Yeah mate the S15 handled so much better, the S15 even felt like it went harder too, think that comes down to the weight difference.

As for this "Sydney Kid" suspension package, where do I find that? Like I said I am new here, could you send me the link to send me straight to it?

Thanks champ

For $4000 you should get at least twin dump pipe into hi flow cat with fulll stainless exhaust, pod filter with heat shield and a front mount, that will probably be at the turbos limit so If you have change try www.greenline.jp for some cheap goodies, pretty anything you need.

------------- remember kids smoke tyres not drugs ------------------

Sydneykid's Groupbuy

I would buy the whole package except the rear strut brace as it does nothing (Sydneykid will tell you this too). You just have to wait for the shocks to come back into stock. If you dont feel like getting everything, at least get swaybars, shocks, springs and castor bushes.

Rest of the money can go on exhaust, and front mount, that should have the R34 goin decently

If you want to stop the body roll, get some sway bars, i got some of sydneykid and they work great, i also got Tein coilovers, some ppl may tell you these are no good but i strongly dissagree

If you want to stop the body roll, get some sway bars, i got some of sydneykid and they work great, i also got Tein coilovers, some ppl may tell you these are no good but i strongly dissagree

How much did you lower your car with the coilovers? Is it a bumpy ride even with the Tein's?

I lowered a fair bit compaired to stock and can still go lower :PBJ: ive got Type Flex coilovers and its pretty bumpy but im not complaining, might be to much for some skirts :P

post-18661-11674429091258802402.jpg

Car wasnt built for comfort, the only problem at the moment is that i need ajustable upper rear control arms, there is a bit of camber in the rear but that is easily fixed, when the car is jacked up the springs are still compressed and the car is sitting on uneven ground in that pic but its sitting perfectly level. Handling is great, grip on the front and can let it slide in the rear when i want :)

I strongly advise you go for a run in a Skyline thats had the Kid treatment suspension , best way to describe the result is that you car suddenly feels smaller and far more nimble than it had . Cournering limits are amazing I suspect because the geometry keeps more of your tyres rubber on the road in most situations .

I would have Bilstein dampers over anything Japanese because they work and are rebuildable here .

Cheers A .

Edited by discopotato03

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...