Jump to content
SAU Community

Recommended Posts

Hi everyone

I'm new to this forum, just thought i would introduce myself and show you my project R33 GTR Vspec.

Hi i'm Steve, i'm 29 and i live in England. Here's a couple of pics of my skyline:

porkchop-express-011.jpg

Garage-Defend-006.jpg

sky1.jpg

The final stages of the project will be coming together throughout the year, namely finishing off the Do-luck bodykit and new 19" Volk TE37's.

Hope you all like it.

Steve

Link to comment
https://www.sau.com.au/forums/topic/149814-hello-from-across-the-globe/
Share on other sites

Nope, not bronze. Special order Mercuary Silver with Diamond cut lip (basically dark silver with a polished lip). :P

Thanks for the thumbs up on the engine bay, its taken about a year and a half to get to this stage and ALOT of money.

Hell yeah. You can hear the cash register ch'ching just lookin' in there.

Great choice on the wheel finish.

Unfortunately our mod laws are getting stricter so I'm spending money jsut trying to still "look" stock :P

Thats one thing they haven't really clamped down on here in the UK, you can mod the car as much as you like and as long as it passes an MOT your fine, how long it will stay that way im not too sure.

With the wheels i just wanted to be a little bit different colour wise

Thanks for the thumbs up guys. Here's a quick spec of whats been done to the GTR.

Engine Specifications:

HKS RB28 DETT Step 3

HKS Pistons

HKS Rods

HKS Crankshaft

HKS Valves

HKS Hardpipe Kit

Tomei 270 Pro Cams 10.25mm lift induction/exhaust

Tomei Lifters & Spring Buckets

Mines Pulleys

Blueprinted & Balanced Bottom End

Gasflowed, Ported & Polished Head

RK Big Baffled Sump

Trust/Greddy Race Spec Intercooler

Trust/Greddy Huge Single BOV

Mocal Oil Cooler

Tomei Oil Pump

Tomei Water Pump

Nismo Bearings

Bronze Valve Guides

ATI Crank Damper

Engine Misc.:

HKS Kansai Stutt Brace

Garage Defend Cooling Panel

RK Polished Oil Catch Tank

Aeroquip Braided Lines

Samco Water pipe Kit

Samco Heater pipe Kit

Samco Rad pipe

Samco Joiners

Samco Vacume pipes

Greddy Polished Top Rad Pipe

Custom Painted Engine Covers

RSP Polished Fuse Box

Polished Inlet Plenum

Polished pipework & plaques

Augment Bonnet Dampers

Nismo Oil Cap

Turbocharger & Induction:

HKS 2540R Turbos

HKS Pro Internal Actuators

HKS Turbo Elbows

HKS Super Racing Induction

Custom Equal Length Top Pipes

Custom Equal Length Balance Pipes

Custom Equal Length Downpipes

Custom Manifolds

Fuel & Tuning:

HKS 11mm Fuel Rail

HKS FPR

Sard 800cc Injectors

Nismo High Flow Fuel Pump

AEM EMS (soon to be HKS Fcon V Pro)

3 Bar Map Sensors

Apexi AVCR Boost Controller

Apexi Boost Solenoid

Exhaust:

Apexi N1 Evo Straight Through (no resonators) Exhaust

HKS Decat

Custom Equal Length Downpipes

Drivetrain:

OS Giken Triple Plate Clutch

OS Giken Balanced & Lightened Flywheel

Nismo shortshift

Weight reduction & transfer:

Me on a New Year Diet.

Suspension, wheels & tires:

Tein Super Street Coilovers

Nismo swing arms

9" X 18" Volks Racing Evolution 4 Forged mono block alloys

Toyo T1S Tyres

Brembo Brakes

Ferrodo DS2500 Pads

Interior:

Apexi AVCR Boost Controller

Defi BF Boost Gauge

Defi BF Exhaust Gas Temp Gauge

Defi VSD HUD

Defi Controllers

Greddy Twin Apillar Gauge Holder

Nismo Dials & Gauges

HKS Boost Gauge

HKS Inlet Temp Gauge

Nismo Gear Knob

Momo Race Steering Wheel

Snooper S5

Pioneer Stereo

Infinty Speakers

Exterior:

Do-Luck Front Bumper

Soon to be Do-Luck Side Skirts & Rear Bumper

Nismo Carbon Fibre Soiler Wing

Carbon Spolier Emblems

:wave: GTR32GUS.... Im no better than the others at cricket. Man we were sh*t :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you've wired up the coils & injectors properly, & have the neo CAS loom for the trigger, it should all work. The VCT works the same way so just different plugs between s1 & neo. Assuming DBW if no IAC. Don't bother with the stock boost solenoid with g4x.
    • THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
    • Light should be a pressure switch, not a sensor.
    • The pressure light likely has a different sender to a pressure gauge, its been too long for me to remember for sure. Just have a look for another sender down near the oil filter. If you are confident in your rewired pressure sender reading correctly, you can be pretty sure it is just the dash light's sender failing, it is a pretty common thing.
    • It would be nice to see the result, but instagram is a click too far
×
×
  • Create New...