Jump to content
SAU Community

Recommended Posts

Hi all,

Took all my audio gear out to go to the track a while back, threw it all back in the other day and no go! Didn't think anything of it, til the other night I tried all the fuses I could find (audio under dash, inline from battery, amp, headunit). All seemed ok, so I tried pulling out and reseating every cable I could find. I went for a quick drive to pick someone up, came back to get back into troubleshooting, unhooked the battery and off we go.

I have an issue with my fine motor skills and sometimes I just drop things - once such incidence occured causing me to touch the rem line on either the pos or gnd outlets on the amp. I'm not sure which, I just know there was a spark. Instantly I dropped everything (literally) and checked the battery - stupid me in my rush had disconnected the terminal, but not secured it away from the battery and it was resting against neg...

After berating myself for being so foolish I set about looking to resolve any further problems I'd caused - only the fuse from the battery had blown - all others were OK.

I'm having a look at it now and I have no idea what else it could be? Are there any other under-dash fuses I should check?

Thanks in advance, I've spent quite a while on this and seem to be stuck :)

Link to comment
https://www.sau.com.au/forums/topic/150202-no-power-to-headunitamp/
Share on other sites

Does your headunit power up? That'd be the first place to start as it's the source.

If not, check the acc/ign fuses under the dash. And if there is a fuse on the direct power line (usually yellow line) check that.. you may have to pull the deck out.

If the h/u does power up, check that the remote wire is working. On the amp end, check with a testing light to see the remote wire comes on when the headunit powers up.

If that does come on, and you're seeing battery power to the amp. Then see if the internal fuse on the amp is busted. If it is replace, if it ain't then you could have a dead amp.

Conversely, if the amp powers up, recheck the speaker leads.

sky017: As mentioned above, I already replaced the fuse near the battery.

Howie: I've already checked the audio fuse, however I'll check more fuses under the dash... at the moment I have no HU power, let alone amp. I already have the deck out and can't find any inline fuse behind there. I've had the HU out a few times, the install was done by Gold Coast Car Sound, and I was never happy with it (they used shitty RCA's and were generally just wankers).

Thanks guys

Edited by mrgilly

If you still can't find any blown fuses under the dash, take the h/u out - and run a testing light over the power & ign wires. If you're seeing power, it could be a blown deck.. but i say your chances of that are pretty low. Also check if your deck has an internal fuse.

edit: just read your updated post. Your 12volt power should always be fused - obviously because it's a live wire.

let us know how you get on buddy. cheers.

Edited by Howie

I'll do the fuse testing in the morning, after losing patience with the car earlier I went back to building my server... now it's time to sleep.

I already checked the fuse in the back of the HU and it's fine.

The 12V line from the battery is fused next to the factory under-bonnet fusebox, if that's what you mean

Cheers

Edited by mrgilly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...