Jump to content
SAU Community

Recommended Posts

Seen these before? Easily remapped? Anyone even got one? ~800 for a trade in ur stock ecu for one of these sounds ok...

http://www.mines-wave.com/english/products...cpu-nissan.html

I asked Mine's and they said this is only part they hold for ECR33's. They are still alive and kicking.

Link to comment
https://www.sau.com.au/forums/topic/150744-mines-vx-rom/
Share on other sites

Seen these before? Easily remapped? Anyone even got one? ~800 for a trade in ur stock ecu for one of these sounds ok...

I dont know where you get $800 from, but you need to check your exchange rate. 96,000 yen is just over $1000 plus shipping of your ecu there, plus weeks wait while they send one back, plus the shipping back. It would be over $1200. plus it's just a re-map of a standard ecu. you could do it here for less (hell you get buy a power FC for less) and at least whatever you did here would be tailored to your car and aus conditions.

Link to comment
https://www.sau.com.au/forums/topic/150744-mines-vx-rom/#findComment-2805344
Share on other sites

There must be some benefit though. I mean you pay ~800 (because I did conversion... dont make this an argument about conv rates its about vx-rom.) and you trade in your ECU for this one, it has to be something better than just be a Mine's part.

Do you pay the amount just for a re-mapped ECU and a Mine's sticker on it? I sent another email to Mines to give me all the features about the ECU. They got back to me within 2 hours last time so well see.

I got to say I'm a big fan of Mine's tuning, they do a fantastic job on their cars.

Link to comment
https://www.sau.com.au/forums/topic/150744-mines-vx-rom/#findComment-2805389
Share on other sites

go ahead and buy it, but i can tell you, it's just a remapped standard ecu with speed limit removed, rev limit raised, fuel cut removed and mapping suitable for higher boost. and yes the price is relevant to this thread. 96,000 yen is over $1000AUD plus you have to pay for shipping both ways and do without an ECU for a few weeks. a power FC for instance which is readily tuneable can be had for around $1000 AND you still have your old ecu so no time spent off the road, and when you swap you can sell your old ECU for say $150. Total cost then is $850 + tuning.

I also think mines are a great tuning company, but buying a pre-tuned ecu from another country, from a tuner that has never seen your car is not a smart idea. taking your car to mines and getting them to map a chip for you in real time on the other hand would be great. if you lived in japan that is.

and FTR I have previously used a mines ecu in one of my cars.

Link to comment
https://www.sau.com.au/forums/topic/150744-mines-vx-rom/#findComment-2805660
Share on other sites

go ahead and buy it, but i can tell you, it's just a remapped standard ecu with speed limit removed, rev limit raised, fuel cut removed and mapping suitable for higher boost. and yes the price is relevant to this thread. 96,000 yen is over $1000AUD plus you have to pay for shipping both ways and do without an ECU for a few weeks. a power FC for instance which is readily tuneable can be had for around $1000 AND you still have your old ecu so no time spent off the road, and when you swap you can sell your old ECU for say $150. Total cost then is $850 + tuning.

I also think mines are a great tuning company, but buying a pre-tuned ecu from another country, from a tuner that has never seen your car is not a smart idea. taking your car to mines and getting them to map a chip for you in real time on the other hand would be great. if you lived in japan that is.

and FTR I have previously used a mines ecu in one of my cars.

^^ his right mate. i also love the mines tunning shop & their work. but honestly better to get a power fc and get it locally tuned. i sold my power fc that came with my car because it wasnt tuned and i didnt have the money to tune it at the time so i bought a mines ecu. i 100% regret doing that hahaha. dont get me wrong the mines ecu is good for bolt ons (exhaust air filter etc), but once u start doing injectors/afm etc u'll need something that is re-tuneable.

Link to comment
https://www.sau.com.au/forums/topic/150744-mines-vx-rom/#findComment-2805810
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...