Jump to content
SAU Community

Recommended Posts

hey mate.

yea i know this car and have driven it and worked on it since he brought it only a few months back. its a realy orsom car and if i didnt already have one id be right on top of this one. a very good buy!

if you want any more info let me know.

damo

I have seen it buzzing around a fair bit. It does sound like it moves when he boots it. I personally havent heard any problems about it. Alot of rumours around about how much power the thing actually makes, I got no idea on the facts so I won't say anything. It's neat though, only fault I could pick from a distance looking at it is that it's never had similar wheels (even in the photo in the paper they are odd) but if you're going to drift it then it wouldn't matter. Go check it out and let us know what ya think of it!

went and checked out car, not bad minor things needing doing, depends how much of a perfectionist you are, will be an alright buy for someone who wants some fun. there was just a few things i didnt like. if he wants the $15,000 for the car id suggest cleaning the engine bay n spraying the rocker.

thats interesting as im yet to see a cheaper r32 with an rb25. when you take a 10,000 r32 and put in a 5,000 r33 engine and g box plus the few thousand worth of engine mods than 15,000 doesnt sound to bat to me especialy when it is here in tassy with fresh rego and new tyres.

oh and im pretty sure the wheels are the same just the rears have dish.

if you want any specs of what it does have than feel free to ask me.

i actually asked around about the car and heard a few things and yeah it costs money to do the conversion but if you look at how much the car still needs spent on it is it worth it.

you are going to get that with any car you buy. lots of things to tidy up and change to suit you. like has been said befor the value for money realy is there and it doesnt cost much to tidy things up once you have a car compared to starting from scatch.

the engine has 85,000kms on it the chassis has 185,000 on it all the things are minor that need doing yes but changing most of the bushes and cleaning stuff up does cost money, im not saying its a bad car unless what ive been told is true but i wouldnt pay that much for the car and i did see it when it was for sale in Vic so i knoe how much they were asking for it, i also dont like the fact that it uses the microtech which has no afm but thats my personal oppinion, thats all i have to say on the car n i wish him luck with the sale

well in 2 years time he'll have some fun then. plenty of time for mates to drive it. thats all right though long as hes happy it all comes down to personal oppinion and he has plenty of time to work on the car now anyway. even if he has problems its still a skyline and not a crappy (insert car make of your choice)

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...