Intercooler Interest...

[YBSLO4]

Hey peoples,

After the extremely good response to my thread about my decision to make and sell good coolers cheap, i was interested to see so many of you would like a full cooler kit instead of just the cooler (seems logical ey ) So i have thought about things a bit more thoroughly and have found that for me to make the cooler i was saying and a piping kit will raise costs a little more than i want. So i have looked around and i know most of you would have heard of them but Hyrbid make a bar and plate cooler with cast tanks and is very efficient and very good overall. Quality build and good performance. It has a 0.2 psi pressure drop across the core at 15psi which is a very good cooler, bar and plate which is an advantage in itself, and can be mounted to any car. I was wondering if you gusy would still be keen if i got hold of these coolers in bulk and then created an alloy piping kit for them ready to bolt onto the car for around say the $1200 mark if you would still be keen? I am definately more keen about this as it allows me to give you gusy the whole package rather than just a cooler and then worry about the organisation of the rest of the stuff, at least this way you can just bolt it on yaself cos it isn't a complicated task to do. The cooler i am talking about can be seen on my avatar on the 500hp GTR... i guess this explains these coolers mean business if it is running on a 500HP GTR with the stuff that guy has on it, big turbos, comp, boost etc. and with excellent results.

I am very eager to jump to it this way if you are there to back me, and as i stated in the first thread, i am a perfectionist and don't compromise on quality or performance, and have done my research into these coolers. So i believe it is equally as good to anything i was going to have built and also is bar and plate. Think about it and post me your thoughts cos if people are keen i am going to start straight away. With making an R33 piping kit from my car and a 180sx/silvia piping kit from my mates car.

Thnx for your time everyone, J.

[Lenno]

hey YBSLO4, are these piping kits going to come over the top and around to the throtlebody, or are the going to hook up to the std cooler pipes under the guard where the std cooler is ?

lenno

[YBSLO4]

It will run like a proper fron mount should, only usin gone of the stock pipes being the one comeing off the turbo, the outlet of the cooler will run through a 3" holesaw cut hole the side panel and up and along the radiator to the throttle body like say a HKS cooler kit etc.

[KamikazeR33]

definately dude

but just a q

how much can u do for just the cooler?

[YBSLO4]

Depends dude not sure yet until i talk orders with teh distributor as to how much they will be from scratch then i can determine the costs.

[KamikazeR33]

ok sweet

ill be up for at least the cooler at this stage

how long do u think till u will be ready to go?

[YBSLO4]

If possible asap... i just have to get hold of the coolers which just contacting the distributor to organise a deal of a certain number of them, then i have to get one fitted to my car to make a blank of the piping then remove it again and get the piping copied in alloy as one piece, with no welded joins, and then get hold of clamps and silicon joins then its ready to go. I want them ready to go in the next fortnight at the lastest. I'll psot definate details this week.

[KamikazeR33]

whats the size also? cos i neva read ur other thread

for this price im sure u will find ALOT of interest and buyers

[YBSLO4]

it is 600*300*76 and there is also one slightly smaller at around 520*250*76 i think.

[YBSLO4]

Here's a pic of the cooler.

[Grim]

yes. for that price and what you have described I will definately buy one.

[YBSLO4]

Hey guys,

Just about definate at the moment to go ahead with the kits. Hopefully should order the coolers by the end of the week and start working on the piping kit asap, so should have kits for R33's in about 2 weeks ready to be shipped. Price as i said is looking at around the $1200 mark, with teh bar and plate Hybrid core, alloy one piece piping (not a cut and weld job) piping, all silicon joins and clampst ready to fit. I'll push to have them as soon as i can.

[franks]

is cutting a 3" hole in the side panel not defectable for structural rigidity?

i have a HKS FMIC kit which plumbs back into the original piping.

[predator]

YBSLO4: just word of advice.. just make sure you get payment up front or at least good sized deposit to ensure people don't say "I want" and then pull out. Happens a lot on these sort of group deals..

[YBSLO4]

Thanx dude,

But its gunna be the same as anyone else would do it in a business situation, basically order directly through me on here or via e-m@il or direct i.e. phone etc.