Jump to content
SAU Community

N1 Headlgihts

SoFly

By SoFly,
in Exterior & Interior Styling

 Share

Recommended Posts

someonestolecc Grand Master

someonestolecc

Posted
Posted
would the n1 headlights for the r32 have the same wiring as the normal r32?

has anyone tried this?

I can't confirm - so a bit useless really, but I would imagine it's exactly the same plug. If it isn't it'd be a relatively easy re-wire. If I had to bet my money would be on the same plug (knowing Nissan of the era).

whats the difference between the n1 headlight and standard gtst headlights?

N1 lights look aggressive as all hell. My dream r32 wouldn't be complete without them, they have a squarer looking section, kind of like the difference between Aus spec r31 lights and JDM r31 projector lights.

Link to comment
https://www.sau.com.au/forums/topic/152402-n1-headlgihts/#findComment-2835732
Share on other sites
[WLDCRD] Mentor

[WLDCRD]

Posted
Posted (edited)
n1 use h4 as the main headlight...whilst the stock ones use i think h1 or h3 cant rem. As with wiring from memory....might have to change to H4 plug. Can check if your really desparte to know. pm me

when you unplug the H3C light, dont unplug it from the globe. There is another plug that leads to the highbeams so both low and high beams share the same plug leading to the main loom. So unplug it from there...its considerably bigger. You end up using that bigger plug to connect to the hi/low H4 in the N1 headlight. Parkers use the same plug. And then there is that extra plug that will be tucked away (somewhere towards the grill). It wont be plugged into anything, and thats the one you will use for the fog/driving lights

Edited by [WLDCRD]
Link to comment
https://www.sau.com.au/forums/topic/152402-n1-headlgihts/#findComment-2837739
Share on other sites
Nathan_G1 Proficient

Nathan_G1

Posted
Posted

far out, here i was thinking.......the above pic was GTR headlights, and the bottom pic was standard GTST, i had both on my 32, wired exactly the same, i just plugged em in, got some really bright white H4 lamps and bingo, she work and light street

Link to comment
https://www.sau.com.au/forums/topic/152402-n1-headlgihts/#findComment-2838076
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...