Jump to content
SAU Community

Engine Dies

Sky-Boy

By Sky-Boy,
in General Maintenance

 Share

Recommended Posts

Sky-Boy Apprentice

Sky-Boy

Posted
Posted

I just bought a skyline(R33 series II) and am having the following problems. (Lucky its still under warrenty, so I'm taking it back to get it fixed) But just wanted to know if any else has experience this problem.

When I'm going slow at about 20 to 30Km/h and am about to take a corner, i sometimes put it in neutral before i enter the corner then when I exit the corner I put it into gear and drive off.

However, sometimes when i put it into neutral the engine just cuts off and dies.

So now I drive it with the car always in gear. so when i take a corner now, i put it in 2nd or 3rd gear and take the corner. However the same thing is happening and the engine cuts off.

It's not happening all the time. But for the last 2 days of driving, its happened about 5 to 6 times.

The idle is steady. This seems to only happen when i'm going at about slow at about 20km/h.

Any ideas/help would be great.

Link to comment
https://www.sau.com.au/forums/topic/152772-engine-dies/
Share on other sites
Sky-Boy Apprentice

Sky-Boy

Posted
  • Author
Posted
what kind of bov do you have on your car? if you've got an atmo bov then it would be causing this.

yeah. Its an after market BOV. blitz bov.

but does this mean that the bov is stuffed? or just crap and I should get a better one?

and thanks for the reply.

Link to comment
https://www.sau.com.au/forums/topic/152772-engine-dies/#findComment-2841424
Share on other sites
Gazee Grand Master

Gazee

Posted
Posted

The venting bov's is a common problem with R33's with their sensitive air flow meters, Because the air isn't being plumbed back and the air flow meter cant sense any air coming back through when changing gears or gearing down it overfuels and stalls. Get the standard one or a plumb back one and make the air go back into the intake pipe or get a safc or another ecu (which is what mighthave been on prior to you buying the car). Go back to standard you cant go wrong if you dont have many mods like bigger turbo.

Link to comment
https://www.sau.com.au/forums/topic/152772-engine-dies/#findComment-2841534
Share on other sites
Dirty32 Collaborator

Dirty32

Posted
Posted

It could be the BOV but i would also make sure that it isnt a bad connection or dry solder joint with the AFM.

I had a similar problem when i had my GTR and when i changed down gears i had to keep on the revs sothe car wouldnt stall...

Was a problem with my AFM's... Might not be the same for you but dont rule it out.

Link to comment
https://www.sau.com.au/forums/topic/152772-engine-dies/#findComment-2841809
Share on other sites
Sky-Boy Apprentice

Sky-Boy

Posted
  • Author
Posted
It could be the BOV but i would also make sure that it isnt a bad connection or dry solder joint with the AFM.

I had a similar problem when i had my GTR and when i changed down gears i had to keep on the revs sothe car wouldnt stall...

Was a problem with my AFM's... Might not be the same for you but dont rule it out.

This is probably a stupid question. But what does AFM stand for?

Link to comment
https://www.sau.com.au/forums/topic/152772-engine-dies/#findComment-2841841
Share on other sites
SECURITY Grand Master

SECURITY

Posted
Posted

maybe try tightening the spring on the bov so its harder and doesnt vent on low pressure.

either that or do the afm fix, if it doesnt do anything then grab a stock/plumback bov or get a tune-able ecu/piggyback computer.

Link to comment
https://www.sau.com.au/forums/topic/152772-engine-dies/#findComment-2842168
Share on other sites
West Grand Master

West

Posted
Posted
I just bought a skyline(R33 series II) and am having the following problems. (Lucky its still under warrenty, so I'm taking it back to get it fixed) But just wanted to know if any else has experience this problem.

When I'm going slow at about 20 to 30Km/h and am about to take a corner, i sometimes put it in neutral before i enter the corner then when I exit the corner I put it into gear and drive off.

However, sometimes when i put it into neutral the engine just cuts off and dies.

So now I drive it with the car always in gear. so when i take a corner now, i put it in 2nd or 3rd gear and take the corner. However the same thing is happening and the engine cuts off.

It's not happening all the time. But for the last 2 days of driving, its happened about 5 to 6 times.

The idle is steady. This seems to only happen when i'm going at about slow at about 20km/h.

Any ideas/help would be great.

Why do you even put in neutral when you enter a coner anyway?

Link to comment
https://www.sau.com.au/forums/topic/152772-engine-dies/#findComment-2844192
Share on other sites
Chris_R33GTSt Proficient

Chris_R33GTSt

Posted
Posted

I had a stalling problem when I first got my car, same as yours, it would just die. We traced it back to an air leak that the dealer thought was in the exhaust before the cat. Turns out that the whole manifold on the engine block was not good and leaking. U should get a mechanic to go over your car with a fine tooth comb to make sure that nothing gets missed. It is worth the cost cause if something major is rooted it will cost a lot more than 30 mins of labour or a case of beer to fix :)

Welcome to the forums mate!

Link to comment
https://www.sau.com.au/forums/topic/152772-engine-dies/#findComment-2844244
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • MBS206
      R33 GTR running -9 with no tune

      By MBS206 · Posted

      You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
    • MBS206
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By MBS206 · Posted

      Run the piping how we all have for decades. Also the duel runners with the +T setup dramatically helps it gets on boost quicker. Yes, chase huge power it'll become a problem, but you're a long way off when you're already saying an aftermarket ECU is out of the budget. You also say NisTune as it's simple, and then immediately say it'll be painful, meaning... It won't be simple. It will likely cost you a lot more stuffing around with a Nistune, than just putting a Haltech or similar in.
    • 677_GTR
      R33 GTR running -9 with no tune

      By 677_GTR · Posted

      I’ll order an afr gauge to keep an eye on it.  Then will get a haltech soon 
    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      TD05 or maybe pulsar PSR2867r Gen 2?  id love a garret but it’s quite out the budget for now and I’m not chasing crazy power.    yeh fuel pump haven’t looked into but whatever works, kind of last on my list.    Nistune because it’s simple but Ik it’s a lot of pain especially as I’m auto +t with the whole seperate TCM etc still investigating that. Haltech id love but once budget tight for now atleast.    finally the reason I’m trying for a plenum instead of the stock intake is I already have a standard Intercooler mounted etc. so the ports are on both sides so trying to not have to go over the clutch fan radiator etc. trying to find a good deal return flow if I don’t than this will do for now I guess. btw any ideas with that, apparently some people have to cut blades to reduce it from hitting the Intercooler piping over the radiator ? Thanks 
×
×
  • Create New...