Jump to content
SAU Community

Recommended Posts

If anyone has the tool to do a compression test to my car and can come up to my place an give me a hand, I just dont want to drive it, in case it blows up on me or something.

Its got biblical ammounts of oil in the intercooler and pipes (blow-by) and its dropping oil pressure badly.

So, help a fellow member! , remunerations in the form of your favourite alcohol beverage, are in order. :devil:

Cheers

Ric

Link to comment
https://www.sau.com.au/forums/topic/152973-compression-test/
Share on other sites

A long time? what's different between an rb20 and a 25? a 25 doesnt take long to do. remove crossover, coilpack cover, coils, injector crank it over.

Is it a redtop or a silvertop? ECCS or NICS?

I'm sorry I don't have the tool Richo but maybe give James from TypeX Motorsport a call:

http://www.rpmlounge.com.au/bdir_typex.php

He's a good bloke, can do anything with any engine. might be able to help you out, but naturally he doesn't work for free. If it's only the tool you need then it shouldnt cost you much.

Edited by Mike_

Whats this tool we are talking about? is it like a gauge or something,

Do you need a different tool to do a Leakdown test? or the same does the job? Sorry for my noobiness the first time I have to worry about the engine on my car.

Cheers guys

Ric

Edited by Richo

you want a screw type compession gauge. Around $30-40 from any automotive store.

also id say its not piss easy, considering most cars it takes about 5-10mins for a compression test, it takes like an hr to do a compression test on a rb. take of crossover and all pipes, remove cover, remove coilpacks, test, etc, put it all back together

Richo, it's a screw in guage that you screw into where your spark plug was. Theres no point in doing it yourself if you don't know what you're doing. As Enrico says it would take you over an hour (if you didn't have help from someone who's done it before), but if someone with the knowhow can help you out it will take 20-25 mins. Leakdown test is completely different.

If you're an RAA member you can call them and ask them to do it for you, if you need a mobile service. Get a quote first as to what it would cost you, but I assume it wouldnt be cheap. about $100 or so.

Edited by Mike_

Yes I know its pretty bad, maybe time for a new RB30/RB25 and new turbo to suit :) *looks at very empty wallet* :D

Mike: I was behind you getting into the city carpark today, I remember your car because of the RPM sticker on the side, it was you wasn't it?

Cheers

Ric

Edited by Richo
you want a screw type compession gauge. Around $30-40 from any automotive store.

also id say its not piss easy, considering most cars it takes about 5-10mins for a compression test, it takes like an hr to do a compression test on a rb. take of crossover and all pipes, remove cover, remove coilpacks, test, etc, put it all back together

you obviously dont work on rb's alot or lack experience. its just as fast as doing a compression test on a sr. i do both all the time.

I can't possibly see how it is just as fast to do a compression test on an RB compared to an SR. The SR you can literally be done in 10 minutes. On the RB you haven't even gotten the darn rocker cover off by then, well on a NEO anyway. POS.

I have a compression tester tool if anyone needs to borrow.

I can't possibly see how it is just as fast to do a compression test on an RB compared to an SR. The SR you can literally be done in 10 minutes. On the RB you haven't even gotten the darn rocker cover off by then, well on a NEO anyway. POS.

I have a compression tester tool if anyone needs to borrow.

Why you taking the rocker cover off? I'm assuming you mean the valley cover, mine hasn't been on for the last 2 years. ;) And NEOs well they've got that lovely plastic turtle shell too.

Also when does time equate to difficulty, I never said it was necessarily quick, who cares if it takes him an hour or even 2? This isn't a WRC service stop.

lol!

Mitsu RalliArt team: ok boys, we got broken rear suspension, engines running rich, air intake filled with leaves, radiator is ~ 80% clogged and we have 3 inch tread missing from rear right tyre... and we got 37 minutes to fix to the next stage... lets get to it!....

Rico: Ok... compression test... want it done in under 25 minutes... neighbours is on at 6:30pm...

Guess which one gets everythin done within half an hour first?

jks :P

Mike: I was behind you getting into the city carpark today, I remember your car because of the RPM sticker on the side, it was you wasn't it?

Yep that was me!!

my rpmlounge.com.au stickers do me proudly :P

Also I would help out but a) I don't like doing anything to anyone elses engine, because i dont want to be responsible for any f**kups.

and b) you said you need it done urgently and I'm full on for the next few weeks. I don't have any spare time I'm sorry! (I write on the boards when im at work)

Yep that was me!!

my rpmlounge.com.au stickers do me proudly :yes:

Also I would help out but a) I don't like doing anything to anyone elses engine, because i dont want to be responsible for any f**kups.

and b) you said you need it done urgently and I'm full on for the next few weeks. I don't have any spare time I'm sorry! (I write on the boards when im at work)

Its all good mate. no worries. One thing though, can something actually go wrong while doing this compression test?, just want to be aware of possible risks, and see if I can avoid them.

So the Rocker covers stay? just need to get the valley cover off, is that right? then get the coilpacks and

coils out to expose the spark plugs and finally remove them, yeah? Shit I am so useless. hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...