Jump to content
SAU Community

Recommended Posts

If anyone has the tool to do a compression test to my car and can come up to my place an give me a hand, I just dont want to drive it, in case it blows up on me or something.

Its got biblical ammounts of oil in the intercooler and pipes (blow-by) and its dropping oil pressure badly.

So, help a fellow member! , remunerations in the form of your favourite alcohol beverage, are in order. :devil:

Cheers

Ric

Link to comment
https://www.sau.com.au/forums/topic/152973-compression-test/
Share on other sites

A long time? what's different between an rb20 and a 25? a 25 doesnt take long to do. remove crossover, coilpack cover, coils, injector crank it over.

Is it a redtop or a silvertop? ECCS or NICS?

I'm sorry I don't have the tool Richo but maybe give James from TypeX Motorsport a call:

http://www.rpmlounge.com.au/bdir_typex.php

He's a good bloke, can do anything with any engine. might be able to help you out, but naturally he doesn't work for free. If it's only the tool you need then it shouldnt cost you much.

Edited by Mike_

Whats this tool we are talking about? is it like a gauge or something,

Do you need a different tool to do a Leakdown test? or the same does the job? Sorry for my noobiness the first time I have to worry about the engine on my car.

Cheers guys

Ric

Edited by Richo

you want a screw type compession gauge. Around $30-40 from any automotive store.

also id say its not piss easy, considering most cars it takes about 5-10mins for a compression test, it takes like an hr to do a compression test on a rb. take of crossover and all pipes, remove cover, remove coilpacks, test, etc, put it all back together

Richo, it's a screw in guage that you screw into where your spark plug was. Theres no point in doing it yourself if you don't know what you're doing. As Enrico says it would take you over an hour (if you didn't have help from someone who's done it before), but if someone with the knowhow can help you out it will take 20-25 mins. Leakdown test is completely different.

If you're an RAA member you can call them and ask them to do it for you, if you need a mobile service. Get a quote first as to what it would cost you, but I assume it wouldnt be cheap. about $100 or so.

Edited by Mike_

Yes I know its pretty bad, maybe time for a new RB30/RB25 and new turbo to suit :) *looks at very empty wallet* :D

Mike: I was behind you getting into the city carpark today, I remember your car because of the RPM sticker on the side, it was you wasn't it?

Cheers

Ric

Edited by Richo
you want a screw type compession gauge. Around $30-40 from any automotive store.

also id say its not piss easy, considering most cars it takes about 5-10mins for a compression test, it takes like an hr to do a compression test on a rb. take of crossover and all pipes, remove cover, remove coilpacks, test, etc, put it all back together

you obviously dont work on rb's alot or lack experience. its just as fast as doing a compression test on a sr. i do both all the time.

I can't possibly see how it is just as fast to do a compression test on an RB compared to an SR. The SR you can literally be done in 10 minutes. On the RB you haven't even gotten the darn rocker cover off by then, well on a NEO anyway. POS.

I have a compression tester tool if anyone needs to borrow.

I can't possibly see how it is just as fast to do a compression test on an RB compared to an SR. The SR you can literally be done in 10 minutes. On the RB you haven't even gotten the darn rocker cover off by then, well on a NEO anyway. POS.

I have a compression tester tool if anyone needs to borrow.

Why you taking the rocker cover off? I'm assuming you mean the valley cover, mine hasn't been on for the last 2 years. ;) And NEOs well they've got that lovely plastic turtle shell too.

Also when does time equate to difficulty, I never said it was necessarily quick, who cares if it takes him an hour or even 2? This isn't a WRC service stop.

lol!

Mitsu RalliArt team: ok boys, we got broken rear suspension, engines running rich, air intake filled with leaves, radiator is ~ 80% clogged and we have 3 inch tread missing from rear right tyre... and we got 37 minutes to fix to the next stage... lets get to it!....

Rico: Ok... compression test... want it done in under 25 minutes... neighbours is on at 6:30pm...

Guess which one gets everythin done within half an hour first?

jks :P

Mike: I was behind you getting into the city carpark today, I remember your car because of the RPM sticker on the side, it was you wasn't it?

Yep that was me!!

my rpmlounge.com.au stickers do me proudly :P

Also I would help out but a) I don't like doing anything to anyone elses engine, because i dont want to be responsible for any f**kups.

and b) you said you need it done urgently and I'm full on for the next few weeks. I don't have any spare time I'm sorry! (I write on the boards when im at work)

Yep that was me!!

my rpmlounge.com.au stickers do me proudly :yes:

Also I would help out but a) I don't like doing anything to anyone elses engine, because i dont want to be responsible for any f**kups.

and b) you said you need it done urgently and I'm full on for the next few weeks. I don't have any spare time I'm sorry! (I write on the boards when im at work)

Its all good mate. no worries. One thing though, can something actually go wrong while doing this compression test?, just want to be aware of possible risks, and see if I can avoid them.

So the Rocker covers stay? just need to get the valley cover off, is that right? then get the coilpacks and

coils out to expose the spark plugs and finally remove them, yeah? Shit I am so useless. hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...