Jump to content
SAU Community

Recommended Posts

attempted the white dial mod to dash cluster last nite

took 2 smokes straight and i had it done with all the green caps removed and reinstalled (did it in carpark whilst eating hj's as i always carry 3 toolboxes with me full of tools (just incase!))

only problem... they were a yellow tinge... so today took cluster out again and installed phillips ultravission hyperwhite/blue globes...

the cluster is now super bright - i love it... however it now has a green tinge due to the factory dials green coating... so im wondering how to fix this? it has been mentioned to use thinners on the dials to remove the green?

any recommendations?

look closer at the pic i supplied up top there is no green on the cluster... he has removed the factory green on the dials... will thinners work and not f**k shit up? what to use?

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

only problem... they were a yellow tinge... so today took cluster out again and installed phillips ultravission hyperwhite/blue globes...

the cluster is now super bright - i love it... however it now has a green tinge due to the factory dials green coating...

In the same boat, the cluster looked orange, so I used three T-10 Narva Arctic Blue bulbs and the green coating is now visible. I couldn't find anything T-5 sized though, except for these Monza LED bulbs, but I chose blue and it actually coloured that part of the dash blue. :)

I'm hoping this green coating comes off with a wipe of thinners :(

i hope so too as im super keen to get uber white

also noticed that 1 of the smaller bulbs (not parker size) lights up the speedo from 120-180... so everything on my dash is bright and tinged green apart from that part which is duller and yellow

also noticed that 1 of the smaller bulbs (not parker size) lights up the speedo from 120-180... so everything on my dash is bright and tinged green apart from that part which is duller and yellow

This is the T-5 bulb that I was talking about, I'm gonna go looking in other auto shops today for something suitable.

led bulbs look shit... just want normal white

went to autobarn - narva do have t5 sized wedge bulbs... i picked one up $2 each... its just normal white not arctic however they said they do do a super white led t5 size - which i will try after i try this normal narva t5 bulb... i really dont wanna use led's as it will mean having to replace all the phillips ultravision ones i just bought and wont be as bright...

just need this green coating gone - whats the go???????

tried to remove the t5 bulb from its holder... it wont come out! not without breaking it... and had a better luke at the new t5 bulb i got which is just basically a new factory normal one so i dont think itll do much

sent the mrs off on a mission tomorrow to find an ultrawhite t5 to match the t10 phillips ones ive put in

she also came up with the idea of tinting the clear plastic cluster cover in 20% tint... so shes doing that tomorrow (hope it doesnt turn out shit!)

ok i finally got home from working on my car, i tried the thinner thing and it works.... but i wouldnt suggest it because it works on the plastic too lol, if your very careful it will look good , i didnt have another part to the cluster to try prepwash on but i think that will do the job perfect. pics in the morning... its sleep time now :D

when f**king around withe my cluster again last nite

i noticed on the back of each dial up to about 80 it is green... then 90 to about 130 or something the lines are white on the back... then green again to 180... wtf?

take pics of the back of the actual dials removed from the cluster? how did it go getting the white and green off? also that shit doesnt feel like it would come off... it sounds like a zipper when you run your fingernail over it

SCORE!

gf did browsing on the auctions this morning. 90-91 cefs had completely different clusters with factory white... i just purchased one now which will be here in 2 weeks... tacho goes up to 9k instead of 8k aswell

no more dicking around with factory cluster

now we wait... if anyonelse wants a late model cluster i can get several more... pm me :action-smiley-069:

ill put pics up tonite of one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...