Jump to content
SAU Community

Recommended Posts

There is no substitute for practical experience. Text books can't teach you how to avoid a kid (or other thing) that suddenly runs on the road from nowhere. I reckon you'll find that with most potentially tragic situations, you need to react, not think. And the only way I can see people learning to react is through practical training.

I did my license in the old P's scheme. I was out driving at every opportunity with my old man for long distance / defensive driving, and the old girl for town driving / parking / etc.. I drove as many different cars as I could get my hands on - v6 Magna, VW beetle, Laser, Celica, VT Commie... And then there was also an aquatience of mine who was the same age, got her license at the same time, could not reverse, could not drive safely at over 50kph, couldn't corner very well, rough on gears, etc. We had exactly the same privaleges and conditions placed on us. If that wasn't a screwed up system, then what is? IMO the only place for a written exam is for road rules. All other driver testing should be behind the wheel. And if parents are unable or unwilling to aid the learner with experience, then the government should free of charge.

Airzone - I fully agree about trying to drive as many cars as possible. I drove just over 100 different cars when I was on my L's as my old man gets a different car each week... it makes such a diff.. before I had my P plates I had driven everything from some of the most powerful rear/front and awd's to the least powerful.

Thinking about that - i think that tests should somehow involve extra training in both fwd & rwd cars...

Originally posted by GTBO5S

if you sell your car for that reason Dave....THEY HAVE WON.... and acheived what they wanted to do in the firs place...read:intimidate!!!

not much I can do about it.. I lost 4 points for those 2 p plate fines, then when I moved back to vic, i got done overtaking and lost 11 points... in the end i was hit with over 18months suspension (i was speeding, but officers lied about speed, they also lied and said i had overtaken on double lines & they also lied saying that my p plates were not visible.. which they clearly were)

so now im waiting to go to court, but fat chance if that is going to help.. its their word against mine... although i have one thing on my side... i was booked doing 115 in a 60zone.. when it wasnt even a 60zone... lets see how they explain that one.

I like the idea deducting the cost of driver ed from a traffic infringement.

Fine $500, course $200. So as an incentive half the points lost and send them off to driver ed with a $500 less $200 = $300 fine. (Like the Math, pretty impressive)

Advanced driver skills will not be mastered in one day, nor will they be recalled in 2 years time when called upon to avoid an accident, however an attitude conducive to safer driving will hopefully be ever present with a driver.

Originally posted by Airzone

There is no substitute for practical experience.

Agreed

Text books can't teach you how to avoid a kid (or other thing) that suddenly runs on the road from nowhere.

Agreed, however they can teach you the theory behind avoiding such a situation.

I reckon you'll find that with most potentially tragic situations, you need to react, not think. And the only way I can see people learning to react is through practical training.

Sure there are going to be situations all the time where this applies. There will also be times where they can be avoided by good judgement.

There's an old saying in aviation:

"The superior pilot uses his superior judgement so he doesn't have to demonstrate his superior skill."

Corny maybe, but it works for me.:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...