Jump to content
SAU Community

Need Mounting Ideas!

R-PWR

By R-PWR,
in Exterior & Interior Styling

 Share

Recommended Posts

R-PWR Proficient

R-PWR

Posted
Posted

Hey Guys

Just want to get some ideas as to where to mount my Greddy Profec E-01 boost controller. Its going in a r33 GT-R, if any1 has any pics or ideas that could help that would be great. I dont want to mount it on the top of the dash for two reasons,

1. Police attention

2. Theives

So yeah if anyone can think of a mad place to mount that sexy screen and has a pic that would be unreal.

Cheers

Ray

Link to comment
https://www.sau.com.au/forums/topic/153997-need-mounting-ideas/
Share on other sites
Gazee Grand Master

Gazee

Posted
Posted

What if you buy another centre console and take out the 2 vents in the middle and just fiberglass/ mould it to fit in the middle of it then spray it the same sort of black...? If you have tinted windows you shouldn't be able to see it i think...

msnismo Grand Master

msnismo

Posted
Posted

Mine is mounted in front of the ash tray - will take a photo tonight for you. Basically I bent the mounting bracket to suit and used the double sided tape. If pulled over it is extremely easy to pull the complete ashtray out and place it next to the tunnel with your leg blocking it from sight :O

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
×
×
  • Create New...