Jump to content
SAU Community

Recommended Posts

put some r33 gtst or r32 gtr calipers and rotors on it, its definately needed if u do any spirited driving as the stock brakes are horrible and with automatic u cant use the gears to slow u down either :P

Brad

Any indication of how much this would cost to do?

Cheers, Al

here in japan i can get the calipers for around 140 for hte front

and rotors for around 300 new

Dude, don't forget that in Japan you probably have an abundance of places to get the parts from, with a lot more choice than us here in Australia, and I'm guessing you're quoting US Dollars, not Australian Dollars, so the prices are somewhat irrelevant to us...

Oh, and Kylie, I thought the front pads were DB1250's? Might have to take them down for cross-referencing when the time comes to change mine... Like Leetom said, if you can't take one off and take it with you when you go to buy some, take a piece of paper and trace around one of the pads and take that to the parts shop to check against.

Hey Al im unsure on costs sorry, i know the 32 gtr and 33 gtst calipers (both the same) are fairly cheap, around $400 for a front pair as a rough estimate and slotted 297mm rotors from DBA would be around $400 for the pair as well. i bought the 34 brembos and 330mm rotors so i dont know about the other calipers/rotors except that they definately bolt on :P

good luck and catch u guys on the cruise tommorow :)

I did mine recently and found that I had to crack the bleed plug to get the piston to move back so I could fit the new pads.

The other cars I have changed pads on did not need this, the fluid just back flowed into the reservior.

Other than that, it was an easy job, saved me about NZ$200. At my last service, they said that they needed doing, and they would do it for NZ$140 + skimming. My front discs did not need skimming so I did it myself.

Dude, don't forget that in Japan you probably have an abundance of places to get the parts from, with a lot more choice than us here in Australia, and I'm guessing you're quoting US Dollars, not Australian Dollars, so the prices are somewhat irrelevant to us...

im actually trying to see if i can mail stuff to you guys so i can pass on the japan price deals!

Hey Kylie

whenever you are changing pads and compressing the brake pistons in, just remember to get someone to watch the fluid level in the resevoir, as if it is full up and you do both without looking it can overflow. The level will rise as the calipers are pushed in. Brake fluid is not good for your engine bay!

Also you can use the tiptronic (to change down) in the S2 to slow the car, or in an S1 change down, into 2. It does help a bit.

So, does anyone have a complete set of Stagea calipers that they want to get rid of? I am looking for the 2 piston fronts and the rears that take the DB1144 pads (though will consider others). I am in Canberra, if that makes a difference.

Cheers,

Matt

Edited by Matty T
I did mine recently and found that I had to crack the bleed plug to get the piston to move back so I could fit the new pads.

The other cars I have changed pads on did not need this, the fluid just back flowed into the reservior.

Not sure what you got, nor have I changed my pads before on my S2 Staj. But maybe the ABS has something to do with the above problems.??

I forgot to take pictures

I'm sorry, but if you want to remain a bonafide member of this forum you will have to go back and take pictures...and we dont care if it is raining...or snowing...pics or ban!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...