Jump to content
SAU Community

Recommended Posts

Might be interested, that is why I question. 160 odd RWKW on 10psi with hiflow - this is lower then most of the standard turbo tunes at same psi! are you sure the compression is good? any proof engine is in good nic?

any info will be greatly appreciated.

It had a 2 1/2" exhaust, and it was a dyno day so no time was spent setting the car up, roll on roll off. It was tested in 3rd gear instead of 4th, plus the dyno it was done at was at least 15kw out from Bresiani, Dalton and JPC from friends of myn who had their cars recently done at those other tuning shops. To cut a long story short the place it was dynoed at have no idea about running a dyno.. Never bothered to take it anywhere else but with the right exhaust and boost it's a easy 190-200+rwkw engine.

$1700 this is everything i've got for it ECU, Turbo, half loom, AFM, intake piping, BOV, POD filter, new NGK plugs perfect upgrade for a R32 gtst etc!!

  • 2 weeks later...
It had a 2 1/2" exhaust, and it was a dyno day so no time was spent setting the car up, roll on roll off. It was tested in 3rd gear instead of 4th, plus the dyno it was done at was at least 15kw out from Bresiani, Dalton and JPC from friends of myn who had their cars recently done at those other tuning shops. To cut a long story short the place it was dynoed at have no idea about running a dyno.. Never bothered to take it anywhere else but with the right exhaust and boost it's a easy 190-200+rwkw engine.

if you did the dyno run in 3rd gear the readout should be higher than usual, not lower.. so have you sold the turbo seperate, or does it still come with the car for $1700? thanks leigh.

Edited by lwboosted
  • 3 weeks later...

Final deal, engine has no sump or pickup on it and missing loom section to ECU otherwise is complete AFM, ECU, Coil packs BOV etc etc. Cannot comment on turbo specs as I don't know them, as like many imported jap cars internal specs are never known. I bought the car with it stated having a hi-flowed turbo so I've advertised the engine at that, it is at least steel wheeled. Prefer to sell complete with turbo, I can assure whoever purchases this engine it's in awesome condition I only pulled it out to put in a RB26/30 Hybrid. I'm happy to keep it if I don't sell it for a project later on but for now it's in the way so hence the sale.

$1400 cash pick-up only, no more time wasters please!

Ph: 0414224905

Edited by nismomiles33
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...