Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

bonnet was/is the hardest bit for them. When i left they were still trying to alter it to look better. The guard sat a bit higher than bonnet so they were going to shave a bit off and try reshape it.

Also the gaps along the side are a little larger. As in the gap betwen the guard and the bonnet. It is a little uneven. Thats what i was most worried about, but im sure it will look ok once its painted.

yeh alot of the time (no matter what brand of front gaurd - genuine or copy) this is a common occurance......

ive left mine as is, it didnt work out too bad.....bonnets never, ever go back in place as they did when they come off the factory table, but like anything its trial and error

really keen to see how it all looks tho, keep me posted

bonnet was/is the hardest bit for them. When i left they were still trying to alter it to look better. The guard sat a bit higher than bonnet so they were going to shave a bit off and try reshape it.

Also the gaps along the side are a little larger. As in the gap betwen the guard and the bonnet. It is a little uneven. Thats what i was most worried about, but im sure it will look ok once its painted.

thanks flick keep us all posted... will be interested to see what the fitting bill comes out lik....

thought i would update this, for Adz2332 and anyone else interested.

Got the car back today finally, and can now happily say that i could recommend Viva garage. That said though, you would need a very patient crash repairer to fit the kit. My guards needed a bit of trimming here and there to make them fit nicely.

Im happy with the results on my guards, even if both sides are a little different, as in the gap at the top of one side is a little bigger than the other side, but you wouldnt really notice. One side fits nicely at the front, where the other side was a little bit of work..

so yeah, bit of work and patience and viva garage kits are ok

thought i would update this, for Adz2332 and anyone else interested.

Got the car back today finally, and can now happily say that i could recommend Viva garage. That said though, you would need a very patient crash repairer to fit the kit. My guards needed a bit of trimming here and there to make them fit nicely.

Im happy with the results on my guards, even if both sides are a little different, as in the gap at the top of one side is a little bigger than the other side, but you wouldnt really notice. One side fits nicely at the front, where the other side was a little bit of work..

so yeah, bit of work and patience and viva garage kits are ok

good girl flick - really great to hear, post some pics up if possible. id love to see how it looks now, besides your also advertising how good your crash repairers work is, so alot of good has come from this

thought i would update this, for Adz2332 and anyone else interested.

Got the car back today finally, and can now happily say that i could recommend Viva garage. That said though, you would need a very patient crash repairer to fit the kit. My guards needed a bit of trimming here and there to make them fit nicely.

so yeah, bit of work and patience and viva garage kits are ok

Flick just curious was this covered by insurance or out of pocket? Can't wait to see some pics though. :(
I got my trust frount bar,gtr wing,eye lids and soon getting my original fenders vented at Speed Dreamz very cheap and good service.

my mate had a very bad experience with them ordered a complete bodykit 1 year later still waiting on rear bar :( saying that i think the rest fitted alrite just kept geting messed around it was for his girlfriends car (civic) not sure if she got the rear bar in the end or not

Went to take pics today but batteries died on me! Will be putting pics up later today.

Most of it was covered by insurance. My crash repairer quoted $250 for 1 second hand panel, so i spent my own $250 and bought the vented guards, so therefor the $250 that was included in the quote was used to paint the second panel. I wouldve paid bout 250 to get the second guard painted, so in essence i did pay for the 2nd guard to be painted. Insurance covered the rest, labour etc, as usual. Cos they have to blend paint into the doors, they just did that anyway, no extra charge for the 2nd side which wasnt damaged in the crash. Pretty good of them, basically blended that side for free. Where i was lucky is the side of the damage, had a key scratch on that door, as part of the quote that door had to be repainted to be blended, so therefor key scratch fixed for free!

Hope that makes sense? lol

My crash repairer is awesome, i would only ever go to them. Tom howards crash repairs on the corner of marion rd/sir don bradman drive - highly recommended.

They went above and beyond, while it was there they fixed up a previous dent and a weakspot in my side skirt that had cracked and was only going to get worse for a very low price.

They also did alot of other little jobs, just cos.. like plastic welding the brackets on my indicators cos they were being held in by cable ties. They lightly glued down my rear bar to the side skirt, where before it was coming off a bit. They even cleaned my car inside and out for me to take home! No extra charge for either of those last things.

I think i saved alot of money and my car is looking better than ever!

So yeah, little off topic, but an update and recommendation for both viva and for tom howards crash repairs.

Pics to come later!

Edited by *flick*

Some pics

IMG_5335.jpg

IMG_5333.jpg

Can notice the 'gap' between the door and guard here, bigger than it use to be with a standard guard. THis photo makes the colour on the bonnet look different too, but its just the angle of the sun/shade playing tricks.

IMG_5329.jpg

IMG_5328.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...