Jump to content
SAU Community

Recommended Posts

Hey guys , recently i dynoed my car and after the dyno, i did a engine compression test and the numbers were pretty bad compared to 2 years ago ~ which was around 130 across all 5 cyclinders except for the 2nd cyclinder which is 100. But after adding some oil on the 2nd cyclinder, the compression on the 2nd cyclinder immediately jumped back up to 125 psi. So they concluded that the injector in the 2nd cyclinder is faulty. But after asking few other workshops, they are saying injectors and low compression rates are unrelated..

any ideas guys ?

Thanks

injectors are before the valves. The oil let the loose rings in cyl2 seal better which bumped up the compression, temporarily. If they added oil to the other cylinders they more then likely would have jumped up much the same, so across the board would have been something like 155.

Surely all the oil is doing is sealing the rings better which means that's what's no good in that cylinder. If the test with oil didn't go up then you would be looking at valves. That's my theory anyway.

Surely all the oil is doing is sealing the rings better which means that's what's no good in that cylinder. If the test with oil didn't go up then you would be looking at valves. That's my theory anyway.

thanks for the replies guys, so is it safe to say its unrelated and irregardless if the injector is faulty or not adding oil will bump the compression readings up ?

thanks for the replies guys, so is it safe to say its unrelated and irregardless if the injector is faulty or not adding oil will bump the compression readings up ?

Unrelated with injectors mate .

You are correct abo .

If a little amount of oil increases comp it means rings and or bore worn but don't forget a substantial amount will increase comp because the combustion chamber is smaller because of the oil . In a low comp cyl if puting oil in to it doesn't increase comp it means the valves are leaking.

Do a leakdown test as well.

leakdown test is the best test to do.

Remove the sparkplugs, remove the intake and oil cap do your test. if its intake valves and there is reasonable leakage you'll hear/feel it coming out the intake, same for exhaust if its piston/rings you'll hear/feel it coming out the oil cap. just make sure that each cylinder is firing TDC (top dead centre).

Its a good idea to turn the motor over a few times once spark plugs are removed just incase theres any foreign matter between the valve and the seat which will give a false reading.

leakdown test is the best test to do.

Remove the sparkplugs, remove the intake and oil cap do your test. if its intake valves and there is reasonable leakage you'll hear/feel it coming out the intake, same for exhaust if its piston/rings you'll hear/feel it coming out the oil cap. just make sure that each cylinder is firing TDC (top dead centre).

Its a good idea to turn the motor over a few times once spark plugs are removed just incase theres any foreign matter between the valve and the seat which will give a false reading.

Thanks guys for the replies, im sending my car in for the leakdown test tommorow. Will see how it goes and check out what is the problem

Cheers

Thanks guys for the replies, im sending my car in for the leakdown test tommorow. Will see how it goes and check out what is the problem

Cheers

HEy guys, got my leak down test and compression test done today. results were

Compression test Leak down test

cyc 1 : 155 10%

cyc 2: 155 20%

cyc3 : 155 5%

cyc4: 153 5%

cyc 5 : 150 5%

cyc 6 : 151 5%

looks like all went well and will be proceeding to the next mods :domokun:

Thanks for the feedbacks

HEy guys, got my leak down test and compression test done today. results were

Compression test Leak down test

cyc 1 : 155 10%

cyc 2: 155 20%

cyc3 : 155 5%

cyc4: 153 5%

cyc 5 : 150 5%

cyc 6 : 151 5%

looks like all went well and will be proceeding to the next mods :domokun:

Thanks for the feedbacks

That indicates bore and or ring wear on number 2. and to a lesser extend in number 1 as well .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 馃ぃ, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
  • Create New...