Jump to content
SAU Community

Recommended Posts

They aren't actually rated by horsepower, they are rated by their flow rate and pressure at which they flow fuel.

040's are rated at 168 litres per hour at a pressure of 5 bar, generally this is good for between 350 - 400 hp, which is why ppl say they are rated at 380hp etc.

still for sale!

Cheers,

Dave

Link to comment
https://www.sau.com.au/forums/topic/157343-bosch-040/#findComment-2922367
Share on other sites

Hi, for these to fit into an R32 GTR what modifications (if any) are required. The main reason I ask is that I won't be installing it myself, will get a mechanic to do it, so want to knwo what I am up for in labour.

Cheers,

Dan :sick:

Link to comment
https://www.sau.com.au/forums/topic/157343-bosch-040/#findComment-2922377
Share on other sites

not 100% sure what modifications are required as I've never actually put one in, but from what I hear it is pretty straight forward, there should be alot of info if you search for it.

Cheers mate.

I've actually heard these pumps fall in 32's 34's and s15's but 33's is a bit more screwing around... free bump good luck with selling the 4 :D

Link to comment
https://www.sau.com.au/forums/topic/157343-bosch-040/#findComment-2922627
Share on other sites

  • 4 weeks later...
$10 dollars to send to anywhere in australia. Guaranteed they are 100% genuine brand new bosch 040 fuel pumps. Bump.

dude you still got the 040 ill like to buy one ill come pick it up today if you can provide me with your contact details or you can call me on 0433188959 cheers

Link to comment
https://www.sau.com.au/forums/topic/157343-bosch-040/#findComment-3015608
Share on other sites

dude you still got the 040 ill like to buy one ill come pick it up today if you can provide me with your contact details or you can call me on 0433188959 cheers

PM sent.

Dave.

Edited by Dave32
Link to comment
https://www.sau.com.au/forums/topic/157343-bosch-040/#findComment-3015628
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • lol the 2nd one boss, thank you for pointing this out. I feel as i spend more time here this intro message is some thing i will always make me laugh and shake my head at. Perfect Intro:  I have the vehicle  
    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
×
×
  • Create New...