Jump to content
SAU Community

Recommended Posts

Hey guys.

Ive just got some 18x8 and 18x9 wheels for my R32gtst.

the offset front and back is 38..

the backs fit on perfectly...

but the fronts hit the calliper.

So i went down to autobarn and bought a pair of 8mm spacers...

and the wheel turns but still rubs against where it says nissan on the calliper..

I called around a few places looking for some 10mm bolt on spacers. but seemingly they are non existant. the smallest i could get were 20mm. which is too big..

what do i do? it only just (as in only JUST! :( i would need about 0.5mm more clearence to be ok).. rubs against where it says nissan on the calliper. could i file the nissan off the calliper?

Cheers guys.

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/
Share on other sites

Plenty of people have shaved "Nissan" off the calipers for clearance but personally if it's that close I would not feel comfortable, especially with "slip on" spacers. Slip ons are dodgey at best and dangerous at worst. They reduce the stud length available for the wheel nuts and are usually not "hub centric".

You've obviously purchased wheels that are low/medium caliper clearance, 4 pot Nissans need high caliper clearance wheels to fit without spacers. Maybe somebody with a Gtst could help with offset variables

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2931466
Share on other sites

I filed the nissan off the calliper.. that and used 8mm slip on (non centering) spacers..

Seems ok for now... Down the track (soon) i will purchase some longer studs...

might even fork out for some centering spacers.. but for now it all seems fine.

Cheers for the help.

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2931941
Share on other sites

Hey guys.

Ive just got some 18x8 and 18x9 wheels for my R32gtst.

the offset front and back is 38..

the backs fit on perfectly...

but the fronts hit the calliper.

So i went down to autobarn and bought a pair of 8mm spacers...

and the wheel turns but still rubs against where it says nissan on the calliper..

I called around a few places looking for some 10mm bolt on spacers. but seemingly they are non existant. the smallest i could get were 20mm. which is too big..

what do i do? it only just (as in only JUST! :laugh: i would need about 0.5mm more clearence to be ok).. rubs against where it says nissan on the calliper. could i file the nissan off the calliper?

Cheers guys.

I had some 10mm ones made up, perfect fit as they were made to suit. Cost $80 a pair or so.

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2932595
Share on other sites

10mm bolt ons? on slip ons?

i wouldnt want to go any bigger than what i have if they were slip on..

are there disadvantages in running a spacer that is bigger than required.

the fact that an 8mm spacer fits makes me not want to go any bigger...

where abotus did you get them made up.. not that it really matters considering your in brisbane..

anyone know of anywhere that could make some up in melbourne?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2934017
Share on other sites

10mm bolt ons? on slip ons?

i wouldnt want to go any bigger than what i have if they were slip on..

are there disadvantages in running a spacer that is bigger than required.

the fact that an 8mm spacer fits makes me not want to go any bigger...

where abotus did you get them made up.. not that it really matters considering your in brisbane..

anyone know of anywhere that could make some up in melbourne?

Cheers

10mm slip on. The smallest you can get in bolt on is 15mm or so I could find anyway.

Mine are a tight fit... As in wire brush to clean it all up, then a slight tap with a rubber mallet to get them on (hubs were still a bit warm tho) They are hub centrivical (sp?). So they tightly fit the hub, then my wheels fit the spacers hub, if that makes sense. And I have longer studs.

[edit] go to http://www.skylinesaustralia.com/forums/in...t&p=2432648 linky linky. Thats some pic of my old ones, and my new ones to give you an idea on what Im talking about.

Edited by dangerous_daveo
Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2936334
Share on other sites

Yeh. they look nice.

the ones i have at the moment have slots rather than holes for the stud to go through. so once they are on they move around a fair bit...

did my best to center them before tightning the wheel..

Ill have to look into getting some longer studs and a self centering spacer for mine...

although either way its still illegal i believe.

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2940310
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...