Jump to content
SAU Community

Sold

BWA

By BWA,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

BWA Mentor

BWA

Posted
Posted

Reason for selling is that I'm only using the car once a week and don't really need it anymore. Rego until November 2007.

Car is completely stock and has never been modified, it would be extremely hard to find a 32 that has never been touched. There is zero police attention so you don't have to worry about getting pulled over all the time or getting defected. If you are looking for something to modify from scratch this is perfect.

In great condition. Has already had all drive belts (incl. cam belt) replaced with a new high flow fuel pump installed recently. Never had any major issues.

Has a 2 way pager alarm with immobiliser and keyless entry. The alarm also has a built in turbo timer.

Manual

Exeddy Heavy Duty Clutch (less than 10,000km's old)

New High flow fuel pump (less than 5,000km's old)

Electric sunroof

15% tint

16" Sparco rims

Type M Bodykit

First Australian Owner

115,000 km

Oil and oil filter religiously changed every 5,000km's

Price: $12500 ono

CRW_1784__800web.jpg

CRW_1636.jpg

In HPI:

CRW_2418_800web.jpg

Contact:

Amanda 0413120586 or email [email protected] or even just PM me

Link to comment
https://www.sau.com.au/forums/topic/157934-sold/
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • Kinkstaah
      Wheel Sizes & Offsets For Skylines

      By Kinkstaah · Posted

      If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • MBS206
      MAJOR FUEL ISSUES 25det neo r32

      By MBS206 · Posted

      Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...