Jump to content
SAU Community

Recommended Posts

not quite sure wat u mean

i dont see how you would starve the car with a 040

wat mod you supporting

as long you getit installed right

pfc, , cooler, bigger turbz, stock injectors, full exhaust

yea i know i was told even if you install it right i'd need a ( surge tank?) cause ill run out of petrol soon as it gets in the reserve tank.

ps= i like ur car man :)

Edited by R33GOD

thanks man

umm yer surge tank is always a good thing make sure that when it comes to fuel you dont go cheap always go for the big bangers to much fuel is better than no fuel at all

im running a 044 with a 1.5 lt surge tank and a standard lift pump and that suppourst 300 rwkw

also make sure you get some teflon braided hose if you buy any one those big pumps or else you will ahve trouble after trouble

there is a thing as a fuel pump thats too big

if it can pump too much and if your sitting in peak hour traffic idling lots the pump will keep going and pushing the fuel around the rail system and back to the tank, which will heat up the fuel, giving you a soggy and sluggish response when you open the throttle

before i go tmy inj n ect i had standard ones and a 044 with a malpassi i was stupid n tryed to get as much power as possiable without any mods

anyways

the malpassi seem to over run the inj and pump a heap of fuel into the car but max sure they dont max out or else Bang..

but you should be right for say 240 rwkw max

there is a thing as a fuel pump thats too big

if it can pump too much and if your sitting in peak hour traffic idling lots the pump will keep going and pushing the fuel around the rail system and back to the tank, which will heat up the fuel, giving you a soggy and sluggish response when you open the throttle

everything is so complicated these days lol (only if you make it complicated)

what sort of pump is ideal for an r33 if not the 040?

there is a thing as a fuel pump thats too big

if it can pump too much and if your sitting in peak hour traffic idling lots the pump will keep going and pushing the fuel around the rail system and back to the tank, which will heat up the fuel, giving you a soggy and sluggish response when you open the throttle

thats very tru but i wat i was getting at was better to more than none at all cause you know wat a shortage of fuel does

040 is fine for most mild gts's

gtr is another goody (but usually 2nd hand, older)

its only like really big pumps that have the "too big" issue

like maybe an 044 or twin 044's etc

the best option if you are chasing just a lil more power with a good tune would b a walbro pump in tank direct replacment just make sure it aint a ebay on i got one of those a long tome ago lasted a 2 power runs

the best option if you are chasing just a lil more power with a good tune would b a walbro pump in tank direct replacment just make sure it aint a ebay on i got one of those a long tome ago lasted a 2 power runs

ive already bought the bosch one :spank:

I got a walbro with 3/4 tank syndrom. gonna aget it down further tonight, anyone know how? is it just the way I placed it back into the tank that it didnt drop down low enuff or somehting?

thast k i have a malpassi if you like but you would have to take it to a tuner if you have one cause they are fiddle lil pricks you should be able to make 220 with those mods already just get a sureg tank put your lift pump in

done

I got a walbro with 3/4 tank syndrom. gonna aget it down further tonight, anyone know how? is it just the way I placed it back into the tank that it didnt drop down low enuff or somehting?

with my walbro back in the day i made a extension with some good hose with the filter at the end she sat right at teh bottom easy as

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...