Jump to content
SAU Community

Recommended Posts

I am wanting to upgrade the whole setup and what some ideas.

I have adjustable coil overs all round with adjustable hight etc

Rear

traction rods

adjustable upper control arms

Hi cas bar

strut brace

lower tie rod brace

whitline adjustale sway bar

ajdustable tie rods

Front

Strut brace

whit line adjustable sway bar

Heavy Duty steering rack tie rod set

Cusco Front Tension Rod bar

Upper Camber Arms

Pillow Ball Adjustable Tension Rods

Adjustable Castor Rods

pineapples

I am wonder if you have some ideas or some past experiance. That you can direct me where i am wrong.

I will be buying the bits and peices and installing them myself and then gettin them adjusted and alined after.

What do ya think?

Edited by mahartika
Link to comment
https://www.sau.com.au/forums/topic/158326-suspension-set-up/
Share on other sites

I have adjustable coil overs all round with adjustable hight etc

Rear

traction rods - not necessary

adjustable upper control arms - just get some offset bushes instead.

Hi cas bar - lock bar presumably - good idea.

strut brace - not necessary

lower tie rod brace - not necessary

whitline adjustale sway bar - good idea.

ajdustable tie rods - what for?

Front

Strut brace - ok for some bling.

whit line adjustable sway bar - good idea set it upp on soft.

Heavy Duty steering rack tie rod set - not necessary

Cusco Front Tension Rod bar- not necessary

Upper Camber Arms - would get some bushes instead.

Pillow Ball Adjustable Tension Rods - Cusco do some nice ones.

Adjustable Castor Rods - um, see above.

pineapples - go on the back!

What do ya think? You don't actually need half of this stuff - so you can save a heap of money.

Front strut brace is worth while.

Aside from that, I agree with everything djr81 has said. A lot of those mods seem to be the typical drift mods.

With the rear tie rod brace, you'll actually find that it's a toe arm brace and it's designed for non hicas models.

If you have a hicas model car, you dont need toe arm brace or adjustble toe arms, you already have a solid brace there and the stock tie rods have plenty of adjustment

And the pinepples are a worthwhile investment too

I am aiming for a bullet proof setup with adjustment of every aspect so i can tune it for curcits.

The guys have pretty well covered it, the only thing I would add is having adjustable everything is fine, as long as you know what each adjustment does. As long as you know which adjustment/adjustments to make to fix the handling imbalance that you have on the day.

An example, it's understeering mid corner, what are you going to adjust? Front stabiliser bar? Rear stabiliser bar? Front damper setting? Rear damper setting? Front camber? etc etc

As the saying goes, "sometimes less is more". If you have so much to think about and choose from, then there is more chance that you will choose the wrong one. Plus you will spend so much time worrying about the adjustments, time that would be better spent learning how to drive faster, watching others and learning the fast way around the track.

What I say to guys, often, is that race cars all the way to F1 have driver adjustable stabiliser bars, because

they are the most effective and simple way to change the car's balance. That's the first place I suggest everyone starts at, it's easy, quick and you can feel the results instantly. The last place is adjustable damping, because it is complex and many people can't determine which direction to go in. When we get a new driver in the race team it takes me a full day of training to get them accustomed to the feel of course damper changes. It takes a full season until they have a good feel for fine damper changes, some never get it and us engineers have to guess what the car needs.

Some things for you to think about

:rofl: cheers :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...