Jump to content
SAU Community

Recommended Posts

my car has coilovers, but is lowered extensively on 17x9's. there is no grip in the wet, but superb cornering in the dry. if you check your rear camber, u will see why, mine is ridiculous. get some camber correction in the rear, then try again.

if your tyres have massive blocks they just wont move the water out, mine are like this and it is dangerous at any speed toi enter a roundabout in the wet. i try not to drive much in the wet unless i have too. if you ant wet grip, lose the blocks.

A Whiteline rear camber kit is $123 on the Group Buy (plus fitting), premature wearing out of the inside of rear tyres costs a lot more than that.

:D cheers :D

my car has coilovers, but is lowered extensively on 17x9's. there is no grip in the wet, but superb cornering in the dry. if you check your rear camber, u will see why, mine is ridiculous. get some camber correction in the rear, then try again.

if your tyres have massive blocks they just wont move the water out, mine are like this and it is dangerous at any speed toi enter a roundabout in the wet. i try not to drive much in the wet unless i have too. if you ant wet grip, lose the blocks.

na my tyres dont have big blocks... im gonna go for the full SK kit but cant get it all at once... but once its all there ill do the setting SK recomended which includes a bit of camber...

TEIN SUPER STREET

i heard these are good but why would i spend $1700 on just coilovers when i can get SK kit for $2300 and it includes everything you need to make your car handle like a dream... coilovers are not the whole suspension they are just 1 of many components...

i had gt champiros on a std r32 gts 4 and i never had any problem with them, even in the wet they were fine. They were ok on the track too, my times were the same or better than std gtst's- not too bad for a car thats 150 kgs heavier.

I am not saying i couldn't have done better times with other tyres but they never gave me any reason to fear them. In fact they were probably better on the front than the bf goodrich radial tas that I put on later which understeered like crazy in the wet, the fronts were always pushing wide(sliding at slows speeds into roundabouts).

I wonder how many people here have gone from a low powered front wheel drive car into a high powered rwd Skyline and not taken the time to learn the car before pushing it?

Whenever i put new tyres on or do something that changes the vehicles dynamics I always take the car for a blast to just get a feel for it, just so I have a few more clues on what to do if the shit hits the fan.

i forgot to mention that i noticed that the inside of the tyres gets worn out a fair bit. is this due to what you are saying?

Yes, thats exactly what wil happen. As you can see you're placing more load on one part of the tyre and less on the other. Hence less grip. I had this problem on my s15, once corrected it made the world of diference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...