Jump to content
SAU Community

Recommended Posts

hi guys i have a s2 r33 gtst and i amwondering wat to do next.

ok so far i have standard turbo still. i have a hks airpod, bov. boost controller running 12 psi,

full cat back exhaust and i am putting on a dump pipe and front mount intercooler next week.

at the moment i am just keeping the standard turbo. is there aything else i need to do with these sorts of mods?? eg, fuel cut defender? upgrade fuel pummp?

whats next?? please help?

Link to comment
https://www.sau.com.au/forums/topic/159051-r33-gtst-wat-next/
Share on other sites

how much power you chasing id go for the smarts things liek a power fc plug in n play easy also a walbro fuel pump and maybe some injectors and if you wanna do a turbo as i think you do try one of these

KKR430

http://www.otomoto.com.au/kkrturbo.htm

all pretty resiable priced wont cost you a arm and a leg but still get awsome results

it depends on wat your chaing big power or nice n reliable all round 240rwkw

how much power you chasing id go for the smarts things liek a power fc plug in n play easy also a walbro fuel pump and maybe some injectors and if you wanna do a turbo as i think you do try one of these

KKR430

http://www.otomoto.com.au/kkrturbo.htm

all pretty resiable priced wont cost you a arm and a leg but still get awsome results

it depends on wat your chaing big power or nice n reliable all round 240rwkw

if i add the kkr do i need to replace the manifold or will the standard be rite?? and do i need a external wastegate? or would an easier choice be to high flow the turbo

direct replacement nothing required

yeh so it is a direct replacement hey. sounds good hey. not to expensive either. pretty cheap/

are they of good quality. tough??

so no external wastegate needed ??

wat else would i need to do? if i got the kkr i would need upgrade fuel pump, ecu? and injctors.

is that all>?>

yeh so it is a direct replacement hey. sounds good hey. not to expensive either. pretty cheap/

are they of good quality. tough??

so no external wastegate needed ??

wat else would i need to do? if i got the kkr i would need upgrade fuel pump, ecu? and injctors.

is that all>?>

these turbos are on the ls1 tt kits have a look on the bottom of that page good quality turobs no waste gate needed internal gated

KKR turbos are not direct replacement.

If your not looking for huge power get one of the slide highflows, not much better "bang for your buck". (Search for slide) And alot more stealth, which is always important in good old victoria.

But like Paul said before you do anything get fuel pump and tune.

KKR380

The ultimate turbo for SR20 or large twin-turbo applications

Water-cooled, 0.86 turbine housing, suits T25 size flange

Internal wastegate with 8psi actuator

Suitable for single-turbo applications on 2.0-2.5 litre engines, or in

twin turbo kits on 4.0 to 6.0 litre engines

Comes with exhaust flange featuring 3-bolt outlet, T25 exhaust gasket,

oil inlet banjo bolt and oil return gasket.

thats the one id go for with a power fc n pump since you have the rest

these turbos are on the ls1 tt kits have a look on the bottom of that page good quality turobs no waste gate needed internal gated

yeh had a look. yeh so 840 bucks later and this could be on my skyline hey. good power output from it i am guessing. i was chasing around the 230 mark.

i am happy with this turbo. it sounds the way to go. wont need to change dump pipe will i??

id be guessing so ring him ask him he is pretty good to talk to but like i said dont go getting a turbo n say yer awsome invest in a ecu power fc is the best option with a fuel pump you looking at aorund 1200 for both even cheaper if you look around then get the turbo

id be guessing so ring him ask him he is pretty good to talk to but like i said dont go getting a turbo n say yer awsome invest in a ecu power fc is the best option with a fuel pump you looking at aorund 1200 for both even cheaper if you look around then get the turbo

yeh my pipe and intercooler are on this week and then i will be saving my pennys and looking to get my hands on a new fuel pump and ecu. and yeh either this option or high flowed option sounds good

Also if you dont have one yet get an upgraded clutch and flywheel combo, also some good brake pads and fluid. All the power in the world is useless if you cant slow it down.

yeh i gathered about the clutch giving way.

thanks for your help guys. will be looking forward to getting it done down the track. would be interested to see how much power i have now at the wheels

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...