Jump to content
SAU Community

Recommended Posts

Hey guys I am chasing some parts for my R32, I hope some of you guys can help me out.

Car: 92 R32 GTS-T Coupe

Parts Needed:

Drivers side air vent (the small circle on located on top of the dash. Mark maybe able to help me out.)

UPDATED 22nd August

Edited by Triptych
come on guys some of you must have some spare parts laying around.

This guy in W.A has a stack of stuff that maybe some interest

http://www.skylinesaustralia.com/forums/in...howtopic=148692

I know it's W.A but heres the link anyways

Ryan I just want to thank you for all your help you have given me so far. Everybody I have come in contact with so far in this communty has been really nice and helpful. Thank you all and hopefully it won't be too long before I get this car looking as good inside as it is outside.

I will do spook. I am starting to think of trying my luck with Nissan or maybe Clark Rubber. Might also be time to start ringing the local Import Wreckers to.

  • 2 weeks later...

well i am pretty sure the pump is fine, I am thinking it is the sensor that is the problem with my fuel guage not reading right so I am going to try swap over the sensor to see if that fixes it. PM me a price your looking at for the sensor. I will be checking out my fuel system tomorrow when I do my coolant and oil change.

Also my holidays from work start on tuesday so that should give me some time to give this car a good look over and start fixing things. One really annoying thing is my Door open light stays on. I have tried replacing the sender in the doors (both sides) and it still does it so I am guess a wire has been disconnected somewhere along the line.

Edited by Triptych
  • 4 months later...


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...