Jump to content
SAU Community

Boost Tee Lag Problems

wlspn

By wlspn,
in Engines & Forced Induction

 Share

Recommended Posts

wlspn Proficient

wlspn

Posted
Posted

Hi guys. I have just fitted a turbosmart boost tee (the new blue 1) to my 32 GTST. Lag in 1st gear is not too bad but in 2nd it takes about 5 seconds to hit full boost. This is probly getting close to 4500-5000 rpm. Is this normal on boost tee's? Other mods are 3" turboback, FMIC, BOV & pod filter. I have been running 10 psi with no probs & have now upped to app. 13-14 psi.

Link to comment
https://www.sau.com.au/forums/topic/159912-boost-tee-lag-problems/
Share on other sites
wlspn Proficient

wlspn

Posted
  • Author
Posted

Come on. Does any1 have any ideas? My mate & his brother both have S13 silvia's with boost tee's. My mate experiences the same lag problem that I do in 2nd gear while his brothers car runs fine but has a tuned ECU. Does this suggest that an ECU remap would fix the problem?

HR31_RB20DET Proficient

HR31_RB20DET

Posted
Posted

Had the same problem with my old turbosmart one, worked great for about half a year and then started doing what you described, took for ever to get boost in second after shifting from first. Replaced the turbosmart one with a GFB boost controller, problem solved.

R33silverS2 Mentor

R33silverS2

Posted
Posted

Basically the turbosmart ones are no good. I bought one for over $100 bucks and when you changes gears the lag would be really bad. There was no boost and it was all have to build again. Was really really noticable as you would be hammering in first then shiftt to 2nd (quickly) and the car would feel real flat, and then slowly build. The turbosmart ones don't allow for air to escape between the actuator and the controller. Keeping the air in the line during gear shifts causes the wastegate to stay open hence you loose all you boost and have to build it up again - bad design. I bought a turbotech as a replacement but still found it laggy till i drilled a hole in it. (some come with the hole others don't dunno why). HAve a look at the turbotech thread + search for turbocmart bleed and you'll find the answers. :)

R33silverS2 Mentor

R33silverS2

Posted
Posted
Would drilling out the restrictor in the turbosmart valve help? What size do you go with the turbotech items?

I drilled a 1mm hole in my turbotech one, 1.5 prob would have worked fine as well. The turbosmart ones have a different setup to the turbotech which is ball and spring. With the turbotech you wind the top in for more boost and with the turbosmart you wind it out for more boost as i believe the turbosmart ones are a bleedvalve type of setup. Due to this i am not sure how you could successfully modify the turbosmart tee to make it work efficently. Prob better off just buying a turbotech, sucks i know, but at least the turbotech's are cheap.

cheers

R33silverS2 Mentor

R33silverS2

Posted
Posted
Would drilling out the restrictor in the turbosmart valve help? What size do you go with the turbotech items?

I drilled a 1mm hole in my turbotech one, 1.5 prob would have worked fine as well. The turbosmart ones have a different setup to the turbotech which is ball and spring. With the turbotech you wind the top in for more boost and with the turbosmart you wind it out for more boost as i believe the turbosmart ones are a bleedvalve type of setup. Due to this i am not sure how you could successfully modify the turbosmart tee to make it work efficently. Prob better off just buying a turbotech, sucks i know, but at least the turbotech's are cheap.

cheers

R33silverS2 Mentor

R33silverS2

Posted
Posted
sorry to hijack but my turbotech one doesnt come with a hole, should i drill a 1mm hole in the body of it like this picture has one

http://img162.echo.cx/my.php?image=00001549rz.jpg

Just drill it directly opposite the barb running to the wastegate. So yeh like the pic.

tek_01 Proficient

tek_01

Posted
Posted

i drilled a hole, what a difference. before it felt like there was something holding me back between gear changes (sort of like i changed from 3rd to 2nd and compression was slowing me down) and generally i had to accelerate more than would expect to keep up with traffic but now the car seems to roll easily after gear changes and boost is straight back up

YAY

so back to the topic, yes it can be a laggy boost tee

lol

bubba Grand Master

bubba

Posted
Posted

I had a turbotech ball valve one installed (no hole :P) was noticing some lag on changes. I have just installed a Greddy Profec B SpecII and it's a world of difference! being able to keep the wastegate shut till almost full boost makes a hell of a difference! :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Jacks that fit under GTR lips that can reach the subframe?

      By MBS206 · Posted

      You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • Piggaz
      Jacks that fit under GTR lips that can reach the subframe?

      By Piggaz · Posted

      http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • f00stx
      Intro/R33 owner

      By f00stx · Posted

      Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • f00stx
      Second time Skyline owner (R33 GTS-T and now a V36 370GT)

      By f00stx · Posted

      Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...