Jump to content
SAU Community

Recommended Posts

Thought I would post this in here since I really hate posting stuff.

Selling my Xbox 360 since I rarely use the thing. It includes;

Xbox 360 Premium Pack

- Xbox 360 unit

- 20GB HDD

- Wireless controller

- DVD remote thingy

Plus it also comes with the following

- Extra wireless controller

- Remote recharge kit thingy for wireless controller

- VGA cable

And it also comes with the following games

- Over G Fighter

- Need For Speed Most Wanted

- Lego Star Wars II

- Dead or Alive 4

- Tony Hawks Project 8

- Test Drive Unlimited

- Saints Row

This unit has been hardly used at all. I go out and buy games, play them once for a few hours and then never again. Everything is in good condition and I have all the boxes/packaging etc, except for Lego Star Wars which the plastic over the case is a bit stuffed.

Looking for $600 for the lot.

Link to comment
https://www.sau.com.au/forums/topic/159967-fs-xbox-360-stuff/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...